Hello,
I face some difficulties to set up the trace on Ozone with my J-Trace pro for Cortex-M.
I succeeded to set it up with the board given with the J-Trace device.
However on the Nordic evaluation board i used, Trace is only used with SWO. So I checked that my pins are correctly connected to use it, and I configure trace on Ozone by hitting tools => trace settings => SWO and let to Auto mode for the clock.
The windows Intruction trace and timeline are still displaying "instruction trace disabled"
I followed some of your tutorial :
- wiki.segger.com/How_to_configure_Embedded_Studio_to_use_SWO
- https://forum.segger.com/index.php/Thread/4506-SOLVED-Using-SWO-with-Ozone
And I succeeded to set up trace on SES.
I get a clue, when SES has configuration trace enabled, the memory at the ITM register address is edited. It is not when I use Ozone.
Could you help me ?
Thank you.
Geoffrey
PS :
Hardware set up :
Windows 7
Segger embedded studio v 3.50
Ozone v 2.56w
J-trace PRO for cortex M processor probe
Jlink Driver v634g
proc nrf52832 on PCA 10040
I face some difficulties to set up the trace on Ozone with my J-Trace pro for Cortex-M.
I succeeded to set it up with the board given with the J-Trace device.
However on the Nordic evaluation board i used, Trace is only used with SWO. So I checked that my pins are correctly connected to use it, and I configure trace on Ozone by hitting tools => trace settings => SWO and let to Auto mode for the clock.
The windows Intruction trace and timeline are still displaying "instruction trace disabled"
I followed some of your tutorial :
- wiki.segger.com/How_to_configure_Embedded_Studio_to_use_SWO
- https://forum.segger.com/index.php/Thread/4506-SOLVED-Using-SWO-with-Ozone
And I succeeded to set up trace on SES.
I get a clue, when SES has configuration trace enabled, the memory at the ITM register address is edited. It is not when I use Ozone.
Could you help me ?
Thank you.
Geoffrey
PS :
Hardware set up :
Windows 7
Segger embedded studio v 3.50
Ozone v 2.56w
J-trace PRO for cortex M processor probe
Jlink Driver v634g
proc nrf52832 on PCA 10040