I have a board with a JTAG chain of an AT91SAM9G45 and an AT32UC3B0256 and whenever I try to connect with SAM-BA v2.9 I recieve a no vaild processor error message. Can the AT32UC3B0256 device be in a chain with the AT91 device?
I also have tried the J-Link Commander and recieve the following:
SEGGER J-Link Commander V4.10i ('?' for help)
Compiled Jan 25 2010 14:44:16
DLL version V4.10i, compiled Jan 25 2010 14:43:57
Firmware: J-Link ARM V8 compiled Dec 1 2009 11:42:48
Hardware: V8.00
S/N : 28003030
OEM : SAM-ICE
Feature(s) : RDI
VTarget = 3.248V
Info: TotalIRLen = 9, IRPrint = 0x0001WARNING: At least one of the connected devices is not JTAG compliant (IEEE Std 1
149.1, 7.1.1.d, IR-cells). (NumDevices = 2, NumBitsSet = 1)
WARNING: No matching core found. Selecting default core (ARM7).
Found 2 JTAG devices, Total IRLen = 9:
#0 Id: 0x00002013, IRLen: 05, Unknown device
#1 Id: 0x0792603F, IRLen: 04, IRPrint: 0x1, ARM926EJ-S Core (Atmel)
RTCK reaction time is approx. 126ns
Using adaptive clocking instead of fixed JTAG speed.
J-Link>
I also have tried the J-Link Commander and recieve the following:
SEGGER J-Link Commander V4.10i ('?' for help)
Compiled Jan 25 2010 14:44:16
DLL version V4.10i, compiled Jan 25 2010 14:43:57
Firmware: J-Link ARM V8 compiled Dec 1 2009 11:42:48
Hardware: V8.00
S/N : 28003030
OEM : SAM-ICE
Feature(s) : RDI
VTarget = 3.248V
Info: TotalIRLen = 9, IRPrint = 0x0001WARNING: At least one of the connected devices is not JTAG compliant (IEEE Std 1
149.1, 7.1.1.d, IR-cells). (NumDevices = 2, NumBitsSet = 1)
WARNING: No matching core found. Selecting default core (ARM7).
Found 2 JTAG devices, Total IRLen = 9:
#0 Id: 0x00002013, IRLen: 05, Unknown device
#1 Id: 0x0792603F, IRLen: 04, IRPrint: 0x1, ARM926EJ-S Core (Atmel)
RTCK reaction time is approx. 126ns
Using adaptive clocking instead of fixed JTAG speed.
J-Link>