[SOLVED] JLinkGDBServer Unknown command line parameter -SelectEmuBySN found

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] JLinkGDBServer Unknown command line parameter -SelectEmuBySN found

    Latest beta 6.33d macosx 10.13.4 (17E202)

    I have several seggers plugged in need to index JLinkGDBServer by serialnumber but it doesnt appear to be supported?
    JLinkGDBServer -SelectEmuBySN 683193986 -device nRF52 -speed 1000 -if SWD -port 3333 -singlerun

    SEGGER J-Link GDB Server V6.33d (beta) Command Line Version

    JLinkARM.dll V6.33d (DLL compiled Jun 1 2018 17:11:53)

    WARNING: Unknown command line parameter -SelectEmuBySN found.
    WARNING: Unknown command line parameter 683193986 found.
    Command line: -SelectEmuBySN 683193986

    Is there another method? Or did this command just not make it into JLinkGDBServer yet? It seems like its in most other tools at this point. Is it possible to be on the roadmap?

    Any pointers appreciated.
    Thanks,
    jacob

  • Hello Jacob,

    We received your request per e-mail as well.
    Please make sure that future inquiries come through one communication channel and not multiple to avoid delays in our response time to your requests.
    The question as been answered per e-mail as follows:


    Unfortunately, we did not have the chance so far to make the command
    line of all utilities identical.

    For GDBServer the command line currently is:
    JLinkGDBServer -select USB 683193986 -device nRF52 -speed 1000 -if
    SWD -port 3333 -singlerun
    This thread will be closed now.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.