I am currently evaluating SystemView, with the v2.50 application running on OSX. Unfortunately, I am experiencing a reproducible crash situation after ~40s of live recording.
I am flashing & running the target with Ozone, and then initiating recording with the SystemView application.
Running with a J-Trace Pro probe on the Segger Cortex-M Trace Reference board (STM32F407 micro).
All the default SystemView config options are set, other than changing the SYSVIEW_RAM_BASE to 0x20000000.
Crash log is attached. Also of note is that the crash affects something that makes Ozone report that it is lost its debug connection.
I am flashing & running the target with Ozone, and then initiating recording with the SystemView application.
Running with a J-Trace Pro probe on the Segger Cortex-M Trace Reference board (STM32F407 micro).
All the default SystemView config options are set, other than changing the SYSVIEW_RAM_BASE to 0x20000000.
Crash log is attached. Also of note is that the crash affects something that makes Ozone report that it is lost its debug connection.