[SOLVED] CMSIS-rtos interface to embOS

ComAp · Mar 23rd 2017, 9:17am

Hello,
is it possible to make request to impolement the CMSIS-rtos interface to embOS?

Company which I represents would greatly appreciate it.

Marek Bily
ComAp a.s.

SEGGER - Til · Mar 23rd 2017, 9:22am

Hello,

we already implemented the CMSIS RTOS layer.
But this layer has a lot of disadvantages in comparison to our embOS API.
Please contact us directly for further information.

Best regards,
Til

ComAp · Mar 23rd 2017, 12:21pm

Hello,

Thank you a lot for response.

Simple we want to unify access to RTOS.
Our common solution expect CMSIS-rtos and write wrapper to wrapper seems odd.

(By the way the similar ambition
we want to use for emFile, emUSB, emUSBH – but interface will be our,
proprietary)

Is it possible to get the CMSIS-rtos
solution as support from you?

Is your solution compatible only with
some specific embOS version (oldest which we are using is 3.88)?

Thank you

Regards

Marek Bílý

Embedded SW Engineer

ComAp a.s.

U Uranie 1612/14

170 00 Prague 7

Czech Republic

comap-control.com/

SEGGER - Til · Nov 17th 2017, 10:05am

Hello Marek,

Is it possible to get the CMSIS-rtos solution as support from you?

Yes, sure. Are you looking for CMSIS-RTOS v1 or CMSIS-RTOS v2?
arm-software.github.io/CMSIS_5/RTOS/html/index.html
arm-software.github.io/CMSIS_5/RTOS2/html/index.html

We have support for both versions but they are sold separately.

Is your solution compatible only with some specific embOS version (oldest which we are using is 3.88)?

CMSIS RTOS v1 layer can be used with any embOS version.
CMSIS RTOS V2 layer can be used with embOS V4.32 and later versions only.

But we still don't recommend to use such a wrapper at all since with it you can only use a fraction of the powerful embOS API.

Best regards,
Til

Share