[SOLVED] Systemview cannot detect RTT buffer location

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Systemview cannot detect RTT buffer location

    Hello,
    If I leave automatic detection ON, buffer is not found. If I specify my RAM range (on xmc4500) as 0x1fffc000-0x2001000 again buffer is not found. Only if I give exact address (my case 0x20004e0 buffer is detected. Is there any reason why buffer is not detected? What I am doing wrong? For JlinkRTTwiever I have specified range in script file as SetRTTSearchRanges(0x1FFFC000,0x14000) and included scriptfile through Jlink control panel and it is working fine. Can systemview use same script file?
    rum

  • Hi,

    The syntax for the search range is <Address> <Size> (0x1FFFC000 0x14000).
    The current version shows the correct syntax in the configuration dialog.
    Could you try this?

    Best regards
    Johannes
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.