[SOLVED] J-Link debugger: option to use J-Link settings file

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] J-Link debugger: option to use J-Link settings file

    Hello,
    it woud be nice to the J-Link Debugger to pass a settings file name (.jlink) instead of "Not specified" in the J-Link control panel.

    Possible uses
    - the .jlink file can reference a JLinkScript needed for the Fujitsu/Spansion/Cypress FCR4
    - the .jlink can contain settings for CFI flash (open problem)

    suggestion would be path and name of the .jdebug project file, just the extension changed to .jlink.

  • Hi,

    Your suggestion makes sense.
    For one of the next versions it is planned to support passing "exec" commands from within the .jdebug file.
    This will allow setting CFI ranges, J-Link script files, settings files etc., all you need.

    Please feel free to add yourself to the notification list for the debugger:
    segger.com/notification/subscribe.php?prodid=178


    Best regards
    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.

  • Hello Alex,
    yes the exec function would be helpful.

    Now i have added SEGGER SystemView sources into our Cortex-R4 (Fujitsu..) based board with an Microsar(Vector) OSEK.
    Without an script like
    C:\Program Files\SEGGER\JLink_V502i\Samples\JFlash\ProjectFiles\Fujitsu\MB9DF125.JLinkScript
    SystemViewer.exe has no way to connect. Temporary workaround is to use j-link commander in parallel.
    So please add a settings file also to SystemViewer.

  • Hi,

    Script-file support has been added to our internal ToDo list.

    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.