[SOLVED] J-Link and FINE Interface

daaver · Sep 4th 2015, 8:40pm

Dear Sir,

We developed a new Pulse Oximeter Board using a RX111 processor (R5F51114ADFL) and on the hardware was implemented a FINE interface to
programming the CPU.
We have J-link emulator but We didn't get to make the program download to the Renesas CPU (eclipse e2studio IDE).
Please confirm if is necessary a J-Link with a new hardware version (V9 maybe?) besides the J-Link RX FINE adapter.

Regards,

Daniel.

P.S.: Using the J-link OB of the demo board YRPBRX1111 the download worked fine.We cut the MD track of the demo board and the lines #RESDET, MD/FINED and UB
were connected to our board.

SEGGER - Niklas · Sep 7th 2015, 10:01am

Hello daaver,

FINE is supported by

J-Link BASE / PLUS V9 or higher
J-Link ULTRA+ / PRO V4 or higher

We would recommend to make use of the SEGGER Trade-In-Program in order to get a recent J-Link probe
which includes FINE support: segger.com/trade-in-program.html

Best regards,
Niklas

daaver · Sep 8th 2015, 5:23pm

Hello Niklas!

Thank you very much for your prompt answer.
The Trade-in program is only valid in USA?

Regards,

Daniel.

SEGGER - Niklas · Sep 8th 2015, 5:55pm

The Trade-in program is only valid in USA?

No, it is valid regardless of the country of residence. Please get in contact with sales@segger.com regarding the exchange process.

Best regards,
Niklas

Share