Ask for help: J-link v6 with Lpc2103+ADS1.2+AXD

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Ask for help: J-link v6 with Lpc2103+ADS1.2+AXD

    Hello,
    I 'm a green user of J-link ,When I use it in the AXD environment ,I receive the following messages:
    (NXP Lpc 2103 ADS1.2+AXD)

    Could not find supported CPU core on JTAG chain
    Bad JTAG communication: Write to IR: Expected 0x1, got 0x7(TAP Command :2) @Off 0x5.

    I have already configure it as the UM08004_JLinkRDI.pdf introduced. And I have try many kinds of frequencies,such as 30Khz 、500Khz、1000Khz... All I have received is the same message . ;(

    How can i fix it ? Thanks!

  • Hello szg8595,

    could you please post the complete output of JLink.exe, when the board is connected,
    to ensure that communication with the target hardware in general works?

    Bets regards,
    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.