[ANSWERED] License of RTT Implementation and Sample Codes

  • [ANSWERED] License of RTT Implementation and Sample Codes

    Can someone clarify under what license J-Link RTT is distributed?

    I recently started using RTT and found it very useful especially for boards lacking UART for console. If possible, I would like to use RTT codes ( download.segger.com/J-Link/RTT/RTT_Implementation_141217.zip ) to be included in our own SDKs. I would like to know if it is possible, in source/binary, with/without modifications, etc.

    Thank you for your assistance in advance.

  • Hi,

    Thank you for your interests in including the RTT code into your SDKs.
    Please find the license conditions below:


    /*********************************************************************
    * SEGGER MICROCONTROLLER GmbH & Co. KG *
    * Solutions for real time microcontroller applications *
    **********************************************************************
    * *
    * (c) 2014 - 2015 SEGGER Microcontroller GmbH & Co. KG *
    * *
    * segger.com Support: support@segger.com *
    * *
    **********************************************************************
    * *
    * All rights reserved. *
    * *
    * * This software may in its unmodified form be freely redistributed *
    * in source form. *
    * * The source code may be modified, provided the source code *
    * retains the above copyright notice, this list of conditions and *
    * the following disclaimer. *
    * * Modified versions of this software in source or linkable form *
    * may not be distributed without prior consent of SEGGER. *
    * * This software may only be used for communication with SEGGER *
    * J-Link debug probes. *
    * *
    * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
    * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
    * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
    * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
    * DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
    * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
    * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
    * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
    * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
    * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
    * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
    * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
    * DAMAGE. *
    * *
    **********************************************************************


    Best regards
    Erik
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.

  • FYI: We will update the header files included in the examples, available for download on our website, too.

    - Erik
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.