Good day to all,
I'm working with MCB1700 and my interface is composed by two FRAMEWINs, one is mostly static, just showing some status that are update every 2 minutes, and the other is composed by a LISTBOX, a MULTIEDIT and some BUTTONS. The LISTBOX represents a series of menus, and the MULTIEDIT represents the output of each menu option from the LISTBOX, the BUTTONS only appear with the MULTIEDIT. What i need to know is, how do i set up a MemDev to draw the transition between the LISTBOX and the MULTIEDIT, and the selection of the option of the LISTBOX.
I'm doing the transition between the LISTBOX and the MULTIEDIT with WM_HideWindow and WM_ShowWindow.
I'm working with MCB1700 and my interface is composed by two FRAMEWINs, one is mostly static, just showing some status that are update every 2 minutes, and the other is composed by a LISTBOX, a MULTIEDIT and some BUTTONS. The LISTBOX represents a series of menus, and the MULTIEDIT represents the output of each menu option from the LISTBOX, the BUTTONS only appear with the MULTIEDIT. What i need to know is, how do i set up a MemDev to draw the transition between the LISTBOX and the MULTIEDIT, and the selection of the option of the LISTBOX.
I'm doing the transition between the LISTBOX and the MULTIEDIT with WM_HideWindow and WM_ShowWindow.
The post was edited 1 time, last by adrianopmaia ().