[SOLVED] Programming nrf51822 with Jlink Plus Programmer/Debugger

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Programming nrf51822 with Jlink Plus Programmer/Debugger

    Hi All,

    We are trying to program our custom board with nordic nrf51822(nRF51422_xxAB) with Jlink Plus programmer but are not able to detect the device on SWD interface.

    When trying to connect using Jlink Flash it gives error that enable to connect no device found.

    Also with Jlink Commander we are not able to detect our device.

    We have also tried by loading the saved project nRF51422_xxAB.jflash in Jlink flash but no use.

    Is there any manual or guide document/link which will help us in programming nRF51822 using Jlink Plus

  • Looks like a double post from here:
    [SOLVED] J-Link Plus Debugger not Detecting nRF51822 Bluetooth Chip wit SWD interface

    Such things will *not* lead to faster replies... They just get you banned when repeating this...
    Closed.


    - Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.