Atmel AT91SAM7S not always programming in stand-alone mode - suspect erase

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Atmel AT91SAM7S not always programming in stand-alone mode - suspect erase

    Hi,
    I have been using a Flasher to program an Atmel AT91SAM7S-256-AU-001.
    I have found that when connected to a PC it will perform all functions as required, and the AUTO function (called by pressing f7) successfully erases programs and verifies.
    However when I try and use it in stand-alone mode it only seems to succeed if a device has been erased first.
    Is there any way in which I can gather log data from the device to explain why it has rejected this?
    I have attached the project settings.
    Thanks
    Andy
    Files

    • branchv63.zip

      (1 kB, downloaded 424 times, last: )

  • Hi,

    We are not aware of any problems with the SAM7S and Flasher stand-alone mode.
    You can start the Flasher in MSD mode (see manual for further information) and read out the log-file (FLASHER.LOG).
    What behavior do you see in stand-alone mode, if you do *not* erase the device?


    - Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.