I'm starting a new device development with the STM32F407 and 3.2" LCD 320x240 with ssd1289 driver.
In the previous project I used the same display with a TI micro and TI Stellaris library graphlib
To do some testing of the new hw with STM32F4 I used the TI library and is fully functional, but obviously cannot be used for commercial products
With the ST device I would like use the precompiled library emWin.
I am studying the emWin documents but unfortunately I read that the driver for ssd1289 is configurable only at compile time so not usable with my percompiled library.
Before continuing the study of emWin I need to know :
Can I solve with a dirver written by me ? (If yes how I can connect the driver with the library?)
or should I look for a LCD controller configurable at runtime (any suggestion ....cheaper... with touch and parallel interface)
thanks
In the previous project I used the same display with a TI micro and TI Stellaris library graphlib
To do some testing of the new hw with STM32F4 I used the TI library and is fully functional, but obviously cannot be used for commercial products
With the ST device I would like use the precompiled library emWin.
I am studying the emWin documents but unfortunately I read that the driver for ssd1289 is configurable only at compile time so not usable with my percompiled library.
Before continuing the study of emWin I need to know :
Can I solve with a dirver written by me ? (If yes how I can connect the driver with the library?)
or should I look for a LCD controller configurable at runtime (any suggestion ....cheaper... with touch and parallel interface)
thanks