Hello,

I am attempting to use:
Segger emBOS evaluation for STM3240G-EVAL board
(SeggerEval_STM32F417_ST_STM3240G-EVAL_CM3_IAR_V6_FS_IP_OS_USB_USBH_120706.zip)

Version info:
emBOS ver. ?; IAR Embedded Workbench for ARM ver. 6.50.1

CPU info:
STM32F407IGH6


I am evaluating RTOSs for our group.

I started my evaluation, but ran into a snag when attempting to run a demo
on my eval platform.

I have successfully run demos from other vendors using the ST-LINK/V2 as my debug interface.
However, when attempting to run the emBOS demo with my IAR IDE with the Segger eval project
re-configured for the ST-LINK/V2 debug interface, the code fails to download. (See attached log file.)
I spent quite a bit of time going over settings and files to see what I might have missed, but found nothing obvious to me.

I do not have a separate JTAG debugger, so I borrowed a J-Trace from another engineer, and found this connection worked without issues.
Unfortunately, he needs his J-Trace back ASAP, so it appears without access to a Segger JTAG debug module
I do not have a way to do my evaluation benchmark tests on emBOS.

Could you please let me know if there is something I can do (e.g., setting or file change) to enable me to run the demo apps using the
my eval board and the ST-LINK/V2 debug interface.

Thanks

Hello Til,

Thanks for the response.

You are correct. I missed the fact the debugger's "Use flash loaders" was not selected as one of the Download options.

-Steve