Hello
I am using MCB2370 , Kiel compiler and J-Link debugger . I have just started with sample application "MeasureCST_HRTimer_embOSView.c". The problem I am facing is I cannot see the profiling in embOS View, the Bytes and Packets get updated at the bottom. What might be the problem? Am I going wrong somewhere? First I flashed the program , disconnected jlink and connected UART cable and double clicked the embosview.exe icon and did the required setup , the baud rate was mentioned 38400 in RTOSinit.c so accordingly I have changed in the embosView. Please help me solve the problem?
Regards
I am using MCB2370 , Kiel compiler and J-Link debugger . I have just started with sample application "MeasureCST_HRTimer_embOSView.c". The problem I am facing is I cannot see the profiling in embOS View, the Bytes and Packets get updated at the bottom. What might be the problem? Am I going wrong somewhere? First I flashed the program , disconnected jlink and connected UART cable and double clicked the embosview.exe icon and did the required setup , the baud rate was mentioned 38400 in RTOSinit.c so accordingly I have changed in the embosView. Please help me solve the problem?
Regards
The post was edited 1 time, last by Aadyanth ().