Using J-Link with STM8

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Using J-Link with STM8

    Hi,

    I have a J-Link and STM8 MCU based evaluation board. My question is, can I use J-Link with STM8 core to connect/load and debug the code? STM8 has a built in support for SWD and J-Link also supports SWD thats why I am interested to use the J-Link instead of buying another probe.

    Regards,
    Zaheer

  • Dear Zaheer,

    Serial Wire Debugging (SWD) for STM8 devices uses a different interface than SWD for Cortex-M devices.
    Unfortunately both are simply named by what they are.

    At the moment only our Flasher STM8 is supporting the interface of STM8 devices. A J-Link for STM8 is not planned at the moment.

    Best regards,
    Oliver
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.