Search Results
Search results 161-164 of 164.
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
Hi , Apple did change something on MacOS Monterey which broke fonts. For example, mono spaced fonts as used in the memory window are not displayed properly. We are working on a work-around for that. In case you see a different issue with Ozone, could you please open a ticket in our ticket system? This can be found here: segger.com/ticket. Best regards -- Alex
-
With your bit-stream I was able to reproduce the issue: Source Code (23 lines) I assume that your device does not support 16-bit and 8-bit read accesses, 32-bit accesses work fine, though. The disassembler reads a 32-bit instruction in 2 phases: In phase 1 the lower 16 bits are read (from address 0x0200) and evaluated. Only if the evaluation indicates a 32-bit instruction the higher 16 bits are read (from address 0x0202). Next, the two 16-bit words are assembled into a 32-bit word and finally th…
-
Hi, I tried to reproduce the reported behavior but did not succeed. Since I do not have access to a silicon where I can adjust the number of available hardware BPs I patched the DLL in order to limit the number of HW BPs to 4, 2, 1 and 0 and attempted setting 5 BPs. In all cases the Jlink commander responded properly: For 4 available BPs 4 BPs were set but setting the 5th was denied For 2 available BPs 2 BPs were set and from the 3rd on all BPs were denied For 1 available BP 1 BP was set and fro…