Search Results
Search results 1-8 of 8.
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
Solved the problem. The problem was moving the laptop from a multi-screen setup to a single screen setup and Segger SystemView opening on the second screen, which is no longer plugged in. Would have to use 'Move' to bring SystemView onto the laptop screen. [Closed]
-
I am having the same issue reported in this SystemView thread titled "[SOLVED] Can't run Segger SystemView" I click on the SystemView icon, click 'Continue', then the program stops with a blank screen that is minimized. Also, during installation, the uninstall program for SystemView was flagged as malicious software by the anti-virus software, Windows Defender. BeyondTrust Privilege Management is also running.
-
I am using a Segger JLink Pro. It is connected to an NXP iMX RT 1064 MCU. When I use J-Flash, v6.88c and connect, I get the following. Connecting ... - Connecting via USB to probe/ programmer device 0 - Probe/ Programmer firmware: J-Link Pro V4 compiled Nov 12 2020 10:08:03 - Device "MIMXRT1064XXX6A" selected. - Target interface speed: 4000 kHz (Fixed) - VTarget = 3.313V - InitTarget() start - InitTarget() - _TargetHalt: CPU halted - InitTarget() end - Found SW-DP with ID 0x0BD11477 - DPIDR: 0x0…
-
I am using a J-Link with Windows 10 version 6.80d Application log started - J-Flash V6.80d (J-Flash compiled Jun 26 2020 17:16:35) - JLinkARM.dll V6.80d (DLL compiled Jun 26 2020 17:16:09) I am using the 10pin adapter to communicate with the MCU. I am able to erase, and program the NXP MIMXRT1064xxx6a MCU. I am able to use the MCUXpresso IDE to download and debug my application. When I go to read sectors, I get WARNING: Supply voltage too low or too high, disconnecting target! VTarget = 0.909V o…
-
[This issue was also posted at the NXP Community Forum under MCUXpresso IDE] community.nxp.com/message/1148845 The problem I am having is the Segger debug session reports "FreeRTOS maximum used priority is unreasonably big, not proceeding" and the debug session stops. My environment is: Segger J-Link Pro, Version 6.44 IDE: MCUXpresso 10.3.1 Target MCU: MK22FN1M0Axxx12 RTOS: Amazon FreeRTOS 10.0.1 Microsoft Windows 7 The default setting for configUSE_PORT_OPTIMISED_TASK_SELECTION is 1, thus FreeR…
-
Problem corrected by rebooting PC.
-
I have the error mentioned above. Below is the log from JLink.exe - connect. C:\Program Files (x86)\SEGGER\JLink_V512i>JLink SEGGER J-Link Commander V5.12i (Compiled Jul 5 2016 19:02:32) DLL version V5.12i, compiled Jul 5 2016 19:01:50 Connecting to J-Link via USB...O.K. Firmware: J-Link ARM V8 compiled Nov 28 2014 13:44:46 Hardware version: V8.00 S/N: 158007855 OEM: IAR VTref = 3.293V Type "connect" to establish a target connection, '?' for help J-Link>connect Please specify device / core. <Def…
-
I am trying to program a TI TM4C123GH6PM MCU with a J-Link device. Details below. SEGGER J-Link Commander V5.12e (Compiled Apr 29 2016 15:04:36) DLL version V5.12e, compiled Apr 29 2016 15:03:58 Connecting to J-Link via USB...O.K. Firmware: J-Link ARM V8 compiled Nov 28 2014 13:44:46 Hardware version: V8.00 S/N: 158007855 OEM: IAR VTref = 0.000V Type "connect" to establish a target connection, '?' for help J-Link> I am successfully using the above J-Link device with IAR ARM development tools to …