Search Results

I have a strange problem where ITM is not shown in the release version of program in the ses console. My configuration seems the same for both debug and release. Before I start disecting config file. Is ITM supported in release version? I dont see why it would be disabled.

I found an interesting behaviour while changing path to the GNU build options in the project file. SES version 6.30 MacOS I was always using global macros for this, so it was never a problem before. Now I would like to have project scope macros to define all file paths. It is working ok for everything apart from build_generic_options_file_name For that particular tag I cannot use "../.." type of path but it needs to be fixed absolute path. Is there a reason for that or is this a bug in the parse…

If anyone experience the same issue, it is due to the ARM compiler + Rossetta2 compatibility. ARM forum For some reason I had issues with version 10.3, but I assume my scripts failed to clear all obj/bin files and there was some mismatch. SES works fine with the version 10.3.

Hi, I am using macOS Monterey on Mac Studio with M1 Max, 64GB ram. I tried both M1 version of SES as well as x64 version. GCC version is: 11.2-2022.02-darwin-x86_64-arm-none-eabi, but I also tried with version 10.3-2021.10, which results in the same behaviour. I was just going through the code and pinpointed issue to the include of <string_view> (there might be other libs as well but this one is what I first noticed).. Basically following code crashes my SES when using external GCC. This for sur…

I just received new Mac with M1 chip. I did data migration from my old Intel based mac (not sure if that could cause any issues). After starting SES and creating new project it compiles normally (using internal compiler). But when I select my old projects (any of them) which are using external gcc, SES crashes. It doesnt show me crash report window, but SES window just disappears. I would assume it is related to calling external gcc commands. My gcc compiler is installed in the same folder as it…

I fixed this problem, but will still leave the original question as it might help someone else with the same issue. As I suspected originally, it was related to the c library, libc.a on the mac os. .tar.gz was "corrupted' in a way that it didnt re-create symbolic libraries properly. And as libc.a was linked to the libg.a, but link was invalid, linker couldnt find the library. Deleting the libc.a sym link and re-linking the libg.a again fixed the issue.

I extracted content of the .tar gcc-arm-none-eabi 2020 to my projects folder on the MacOS. I added toolchain folder to SES and I am able to build the source files, but it fails immediately on linking. I created new project, so it just contains boilerplate files for CortexM. I dont use any external library. Seems like some option in the SES makes something weird in the linker command, but I cant figure out which .. Source Code (6 lines) there are only two places in this output which contains --st…

Is there a way to define filter in the project_template.xml custom template to select just certain devices from the list ? Source Code (1 line)For example, above project template will initiate target select window, but it will show everything there. So user needs to type in the whole name in the search to show the selection. It is easy to do the typo and create invalid project. What I would like is to predefine target list, at least by filter for example "LPC541*" or something similar. Is that p…

Hi, Attached is the svd file. Issue happens as soon as I attach the svd file and do the first debugging over SWD. I dont even enable any of the peripherals in the register viewer. Didnt try JTAG, as I dont have compatible board. Removing the svd file, everything is back to normal.

I am using embedded studio v4.12. After loading the LPC5410x.svd file, debugging slows down by factor of 1000 (maybe more). Each "step over" takes 2-3 minutes instead of 1second. This same file worked fine in version 3.42b, so I wouldnt say its corrupted definition file. I didnt noticed any issues on other mcu's I am using. That doesnt say much as I am only using 4 different mcu's, but still its not affecting performance on the others. Removing the "Register definition file" from debugger, retur…

I made a little test application, and I was able to reproduce the behaviour. After better observation, problem seems to be in Memory viewer rather than debugger clearing the code. What I did is following: Source Code (3 lines) This works like a charm. Restart the micro, read address again, all there. Then I did the following: Source Code (5 lines)After that I cant get any of the Memory viewers to get anything from that memory address. It gets stuck on "0x00FFFFFF". Sometimes restarting the debug…

I have code that I am debugging now and it is around 8kbyte large and it sits in sector 0 (start location at 0x0000). According to the user manual each sector is 32kB. I have pushed some custom data to Flash at position 0x8000 (sector 1), but after toggling the power of microcontroller and re-connecting the debugger, data is gone. It is replaced with 0xff. Is this due to debugger clearing all sectors before downloading the code to host ? I was expecting only to clear the sector that is used by t…

I have issues using VCS on macos with GIT. I have local repository (cloned from the server), which I can open with GIT client (Tower). In Embedded studio, I have configured the git executable "/usr/bin/git" and preferred username and email. When I load the project, I get "dirty file" notification that I need to commit changes. I have set the git login for the project (it is correct one as I am using the same from Tower), but when I try to commit the changes I get error: "Commit post-multi failed…

Hi Nino, I am using custom configuration as I want to include some precompiler definitions and library path in the template. I have created a template in a projects xml file, but there are those few things that doesn’t work for me.. I would rather have my own project template then to use generic ones..as I have more control on how wizard creates the skeleton application for me. I would appreciate help in creating a template, well to fix these issues I have.

I am trying to make custom template for the LPC11Cxx CPU. I have issues with project file generation, as I dont know what property I need to include to change parameters. One thing that is bugging me is filter of the target devices. I want to filter out selection to only "LPC11C" devices. I have property for autoselect default mcu with option of selection, but when I click on modify it shows me list of all mcu's. Source Code (1 line) Other thing that is bugging me is when the project is created …

I am not sure if I am doing something wrong, but I am still getting "Debug, Debug M0, Release, Release M0". And if I delete Debug or Release it also deletes all of the settings, so I dont have DEBUG preproc in "Debug M0". this is what I am getting after the code is generated Source Code (20 lines) and this is the actual template: Source Code (6 lines) why are Debug and Release still visible ? how do you distinguish between private and public configuration?

Hi, I would like to make a template for different type of uC that would use some generic parameters across. I was looking at the configuration and couldnt find a proper way to do it. What I want is to have configuration for CortexM0 (which would append something to preproc definitions and add user include directories) similar for CortexM3 and M4. I dont want to see other build settings then Debug and Release. I was trying to achieve this with following: Source Code (3 lines) and then in my proje…