Recent Activities

Hi, Is there a plan to add support for the new nRF54 family of MCU from Nordic in SES corresponding package? I only found segger.com/supported-devices/nordic-semi/nrf54 and wiki.segger.com/Nordic_Semiconductor_nRF54Lxx on the segger website but the…

Using Jlink Flash v8.10e, I'm not able to do anything as the software is not able to halt the core. Looking at the code it looks the JLINK_GoIntDis function is not working. Part of trace : T272C 314:597.888 JLINK_GoIntDis() T272C 314:600.768 -…

Hi fraengers, We have successfully reproduced the issue. At first glance this seems like it could simply be that a part of the chain is overloaded. This could be some buffer, the connection itself or even the host system. We will of course check whether…

Thanks a lot, Alex! That is a real pleasure using your software!

Quote from SEGGER - Alex: “Hi, The legacy USB driver is indeed to compatible to Windows ARM64. See here: wiki.segger.com/J-Link_on_Windows_ARM#Requirements forum.segger.com/index.php/Att…e128bc7ce33cab290e8ae9170 As you can see here: …

Thank you for the elegant solution. Works pefectly.

Hello, there is no need to switch to another skinning function. Just use an option to set user data as a color of the thumb. Something like this: C Source Code (60 lines)

Hi Vlad, we are able to reproduce the issue. A fix will be provided in a future Ozone release. Thanks for notifying us! Best regards -- AlexD

Hello, I am using the SLIDER widget for moving a graphical cursor line in a diagram (see picture). The bar and the scale are made invisible. The yellow thumb I made by skinning. Now I would like to add a second slider with a different color. How can I…

We have been using Segger J-Link plus for debug and programming purpose of one of our project development having RA6T1 Renesas MCU series. While testing JTAG SWD signal programming, we are capturing clock signals having rise and fall time in range of…

Hi, We're using the ST Secure Manager on a board with the STM32H573 micro. Without the Secure Manager installed on the board, we can use the j-link & IAR to download & debug without any problem. However, once we install the Secure Manager onto the…

Hi Hendrik, since emNet V3.58.0 the setsockopt() option SO_BINDTODEVICE is supported which allows you to bind sockets to a particular interface.

Hi, i have another question: What is the preffered way to bind a socket to a specific Interface? Background: We want to have several VLAN-Interfaces and want to send traffic from different applications in different vlans. Best regards

Thanks, Alex. I hope fixing that issue does not take much time

Hi! I purchased a J-Link EDU Mini when I was in school; it was sometime around 2017. I was wondering if there are limitations on what MCUs it can connect to? I purchased an STM32H755ZI devboard which has a Cortex M7 and M4; it is unable to connect to…

Hi, thank you for providing the details. It appears to be the case that Ozone somehow swallows the upper 32 bits of the registers D16..D31. We will need to have a closer look for reproducing the issue locally. Best regards -- AlexD

Hi Namklak, please use the he context menu of the terminal window for deselect the respective options and close the terminal window. Further details can be found in the description of the terminal window in the Ozone user's manual. Best regards -- AlexD

Hi Is it possible via any form of software configuration to change the Chip Select pin to be active high instead of active low for flash programming via JFlash SPI? segger.com/products/debug-probes/j-link/tools/j-flash-spi/

I stay tuned and looking forward to Ozone results. Regards AlfredJodaQuak

I am trying to enhance a firmware package provided by Qorvo, which uses the Segger IDE for development. 1. the .h files are not shown in the project file tree.. but I need to examine/change them as I am writing new code to add function. I assume this is…