Recent Activities
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
SEGGER - Alex -
Replied to the thread SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) in Renesas demoboard doesn't work using Jlink Ultra+ and instead works with J-Link OB-S124 embedded in demoboard.
PostI doubt that it is a problem with the ULTRA+ firmware but more a setup issue. Probably you have set the SWO speed to “max” and the ULTRA+ (which is capable to handle up to 100 MHz SWO speeds) leads to settings that exceed the max. speed of the… -
SEGGER - Alex -
Replied to the thread J-Link Boot Mode Switching.
PostHi Pedro, What unit do you use? (Can you please PM me the S/N?) There is currently no official way to do this via J-Link Commander but we should be able to add something like that. Way easier than adding a whole command line handling to a heavy, almost… -
SEGGER - Alex -
Replied to the thread Can not halt m4 on AM572x evaluation module by JTrace..
PostHi Steve, Sounds a bit like the M4 is clocked, so the AHB-AP debug domain is accessible but the core itself is still held in reset. This would explain why it is not responding to halt requests etc. Is that possible in your case? -
SEGGER - SebastianB -
Replied to the thread How to remove Library Paths from project's .elf file.
PostHello Lef, Thank you for your inquiry. As Frank correctly wrote the ELF format does include debug information, while binary and hex only include the image itself. Instead of using an external tool, the binary or hex output may also be generated… -
SEGGER - SebastianB -
Replied to the thread Text Editor: cursor doesn't align to mouse pointer.
PostHi Steve, Thank you for your inquiry. Such an issue is not known to us. Could you please provide more information regarding the issue? Which host OS are you running? Which version of Embedded Studio are you using? Are you using any display scaling… -
_frank_ -
Replied to the thread How to remove Library Paths from project's .elf file.
Post> My colleagues need to pass the code to a fuzzing tool. Assuming you talk about what I know as obfuscator tool, I don't know what want to achieve with that step. Such a tool tries to hide certain details of the file from third parties, such as path… -
mIwav__ -
Replied to the thread how to add custom device support in newer version J-Flash?.
Posthi, you can add support for custom devices as described here: J-Link Device Support Kit - SEGGER Wiki Basically, you can create the folder structure in C:\Users\YOUR_USERNAME\AppData\Roaming\SEGGER\ There you create a new folder \JLinkDevices and then… -
Lef -
Replied to the thread How to remove Library Paths from project's .elf file.
PostMy colleagues need to pass the code to a fuzzing tool. That tool accepts only .bin files. So, as you said I converted the .elf to hex file and then to .bin file but the library paths can still be seen through the tool. So I was thinking maybe if I… -
zxb -
Posted the thread Markers are displayed wrong beyond 10000 passes.
ThreadHello, I found that when markers exceed 10000 passes, they are displayed wrong. Please look at the picture. I am pretty sure that is a bug in Systemview software, because the microcontroller is always running, and if you restart the trace, the display is… -
zzk -
Posted the thread how to add custom device support in newer version J-Flash?.
Threadhi segger staff, i'm using some arm cortex devices from small companies that are not offically supported by J-Flash. in older version(V6xx), i can manually add something in JLinkDevices.xml, put some .flm files in /Devices category, and the device… -
Steve Sun -
Replied to the thread Can not halt m4 on AM572x evaluation module by JTrace..
PostConnecting to target via cJTAG InitTarget() start TI AM572x (Cortex-M4_0 core) J-Link script J-Link script: Init ICEPick TotalIRLen = 6, IRPrint = 0x01 InitTarget() end - Took 96.1ms TotalIRLen = 10, IRPrint = 0x0011 JTAG chain detection found 2… -
PedroBastos -
Posted the thread J-Link Boot Mode Switching.
ThreadHi, I am working on automating several hardware tests to run overnight and have encountered an issue with automating my J-Link. For these tests, I need to switch between the two boot modes (J-Link and CMSIS-DAP) since both are required at different… -
pbizzarri -
ThreadI'm using a Renesas demobaord with RA6M5 (R7FA6M5BH) microcontroller and e2studio IDE-Debugger (eclipse based) I configured debugging with jlink over SWD and enabled SWO for printf debug using ITM (SWO) Debugging with an external Jlink Ultra+ (version… -
Steve Sun -
Posted the thread Can not halt m4 on AM572x evaluation module by JTrace..
ThreadHi, I have a AM572x evaluation module and a jtrace. I can debug A15 correctlly, but I can not debug M4. I can connect M4, but can not halt. I ask this question on TI's forum, but not resolved. e2e.ti.com/support/processors-…=%20user%3A606064#5199757 I… -
SEGGER - Alex -
Replied to the thread RTT on ARM1176?.
PostHi, There is no RTT support for ARM11, as ARM11 does not support background memory access. The “emulation mode” is also not available for ARM11 -
pbizzarri -
ThreadI'm trying to use printf over ITM channel (SWO) with microcontroller Renesas RA6M5 (R7FA6M5BH) I'm using ozone (version 3.34) and my JLINK Ultra+ with JLINK updated to version 7.96H Ozone project is well configured for SWD and SWO (see attached ozone… -
stevec -
Posted the thread Text Editor: cursor doesn't align to mouse pointer.
ThreadWhat it says in the subject. If I hover over text and hit the mouse button the cursor doesn't consistently align with the mouse pointer but is several characters off. Extremely frustrating to use. -
_frank_ -
Replied to the thread How to remove Library Paths from project's .elf file.
PostELF is basically the debug format, i.e. contains all the information for debugging (with the respective flags enabled). Why not doing a post-build step, and convert the ELF output into an *.HEX or *.SREC file ? These formats contain nothing but the… -
lhz412 -
Replied to the thread [SOLVED] Failed to get index for device name.
PostThe issue was solved. It is not J-link, but CubeIDE. The latest CubeIDE embedded a pretty old J-link driver, which was too old to support the very new MCU. I had natively thought the IDE driver would be automatically updated while the latest J-link… -
apullin -
Posted the thread RTT on ARM1176?.
ThreadCan RTT be made to work on an ARM1176 target? Yes, I know it is now ancient silicon. After some tinkering, there seems to be some suggestions that it might be impossible due to no "background memory access"? The control block is definitely linked and…