Recent Activities
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
ruben.m -
Replied to the thread AppWizard rotate keyboard object.
PostHello, we have a gyroscope and then we want to rotate the keyboard when we detect that the screen has been rotate (like a mobile phone), then which is the best way of rotate the keyboard and the rest of objects? -
dnars -
Replied to the thread Setup SystemView with FreeRTOS in IAR.
PostHi, I am also in similar situation. Also using FreeRTOS 10.4.3. I've been able to get some information back from the device before the SystemView (v3.54) crashes. See profile_log.PNG attached. One thing to add, is that I had to manually add C Source… -
StefanSchmidt -
Posted the thread J-Link GDB Server erases flash sectors used for storing persistent data when downloading a firmware image.
ThreadHello, I am using the J-LINK GDB server V7.98a for downloading and debugging my firmware on a Nordic nrf9160. Recently I added a flash area for storing persistent data in the firmware. This data is located in the area 0x000f8000-0x000f9fff. When I… -
Eqqman -
Replied to the thread Segger Embedded Studio STM32F411 startup files doing something that prevents code execution.
PostAttached are the map files and the file compare results of the compiled code for debug and release mode. Aside from formatting the differences appear to be related to address locations, so this information didn't help us any. -
botched22 -
Replied to the thread [SOLVED] Debug+trace connector for SiLabs EFR32BG22.
PostI can confirm the connector shown above worked for us on the BG22. You have to slow HCLK down by a factor of 8x to allow ETM enough time to keep up with the data rate from the trace. I did that with this line: Source Code (4 lines) -
gabriel-fz -
Replied to the thread How to use the JLinkRemoteServer CL version.
PostHi Simon, thanks for your support. Log when successful (using JLinkRemoteServer.exe -Log C:\dev\jl.log) Source Code (49 lines) The log with the failed attempt: Source Code (25 lines) Regards, Gabriel -
Masmiseim -
Posted the thread Some GUI issues.
ThreadHello Segger Team, just like to let you know. In the Embedded Studio editor, the small arrows next to the scrollbar are missing in dark mode: forum.segger.com/index.php/Att…c8ba3c031150c9ae731dcd6ce You seem also to have problems with Unicode… -
RTTseemsOK -
Posted the thread RTT 50ms timeout is too short for linux container pass-through.
Thread* Running an STM32 device * JLink Ultra to Linux host machine over USB and SWD * VS Code remote dev container (docker) for my environment, cortex-debug extension in VS Code to active and use JLinkExe. So USB is tunneled inside to docker (linux to… -
SEGGER - Simon -
Replied to the thread Jscope RTT time stamp.
PostHello, Thank you for reaching out. The timestamp value in J-Scope is interpreted in microseconds (µs). To display the correct timestamps with J-Scope, you should start with a timestamp of 0 and increase it by 2000 (2ms) each time you send data. Best… -
SEGGER - Simon -
Replied to the thread How To Setting in J-Flash DualBank, J-Link.
PostHello, For the Traveo 2 family, we do not support Dual Bank mode. You could write your own Flash Loader if needed using the J-Link DSK. For more information, refer to: wiki.segger.com/J-Link_Device_Support_Kit … -
SEGGER - Simon -
Replied to the thread why jlink gdb server reponse "Unsupported CPU"?.
PostHello, You could try to read the registers one by one using the "reg" command: wiki.segger.com/J-Link_GDB_Server#reg Best regards, Simon -
SEGGER - Simon -
Replied to the thread Program external qspi flash on custom PCB using JLink.
PostHello, You can only choose out of the available pin configurations that are available the MCU and cant adjust it yourself. You can find the available pin configurations for the STM32U599 here: wiki.segger.com/ST_STM32U5#QSPI_Flash If your Pin… -
GiannisAn -
Posted the thread Program external qspi flash on custom PCB using JLink.
Thread -
SEGGER - AlexD -
Replied to the thread Debugging STM32H745.
PostHi Fraengers, those questions are related to J-Link, not Ozone. Therefore I move this thread to the J-Link forum. Best regards -- AlexD -
Eqqman -
Posted the thread Segger Embedded Studio STM32F411 startup files doing something that prevents code execution.
ThreadHello- Our project is on the STM32F411 Discovery board produced and sold by ST. We have a project that is meant to run as a stand-alone image but also can be uploaded via USB to the STM32F411 that is also running our bootloader. To enable this behavior… -
pilot8 -
Posted the thread Setup SystemView with FreeRTOS in IAR.
Thread -
tinydrop -
Replied to the thread why jlink gdb server reponse "Unsupported CPU"?.
PostI expect to watch aarch64 regs, Could you tell me which command I can use ? Thanks. -
aabadie -
Replied to the thread [SOLVED] Use GNU linker with Nordic nRF5340 build.
PostMy initial goal was to be able to boot from a secure image that afterwards jumps to another non secure image placed right after the initial secure one. My problem was that jumping to the non secure was triggering a hard fault. I also wanted to be able to… -
flyRobot -
Posted the thread --print-memory-usage linker flag not display evetytime building.
ThreadHi, I have a Andes RISC-V project using HPM6364ep. It is using gcc compiler so the memory usage window is empty. I add "--print-memory-usage " to the Additional Linker Options, the memory usage showed only once at first, then it will not show up if…