Recent Activities
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
gustavolaureano -
Replied to the thread ETM trace maximum data rate on STM32U575.
PostHi Thomas, Sure, SN: 752000737 Thanks for confirming that, hardware-wise, it is within the operating ranges, regarding your points: 1. no other signals or traces are connected to the trace data pins, although our connection is somewhat inadequate at… -
Chinnathun -
Replied to the thread Multiple programming IC RSL-10 from On semi.
PostMany thanks, Alex -
SEGGER - Simon -
Replied to the thread JLink suppress "device is secured" popup msg.
PostHello, I apologize if I have expressed myself unclearly. SuppressGUI is an J-link Command string not an command for the J-Link Commander. However, you can execute J-link Command string in the commander with the exec command, so in your case you need… -
cdabjha -
Posted the thread display driver ST7789VI.
ThreadWhich driver shall I use for this chip ST7789VI, connected via SPI. -
SEGGER - Alex -
Replied to the thread Creating user flash algorithm options.
PostSorry for the delay in response. We have no intentions to remove the open flash loader (OFL) support. We also do and will continue to support CMSIS algorithms, as stated here: wiki.segger.com/J-Link_Device_Support_Kit#DSK_availability (The SEGGER flash… -
SEGGER - Alex -
Replied to the thread Multiple programming IC RSL-10 from On semi.
PostHi, Sure you can connect 5x Flasher Compact using a standard USB hub. Here you can find an example to program multiple targets in parallel: wiki.segger.com/UM08003_JFlash…tiple_targets_in_parallel -
SEGGER - Alex -
Replied to the thread Debug+trace connector for SiLabs EFR32BG22.
PostHi, to 1) See here: segger.com/products/debug-prob…#technical-specifications and look for VIF. 1.2 - 5V are fine for VIF (VTref) to 2) While it is a bit unusual to shared TRACED0 with SWV because SWV is usually shared with TDO, I can see why SiLabs did… -
botched22 -
Posted the thread Debug+trace connector for SiLabs EFR32BG22.
ThreadHello, I am trying to build the 19 pin debug+trace connector for a Silicon Labs EFR32BG22.Here is the link to the reference manual for that part: silabs.com/documents/public/re…-manuals/efr32xg22-rm.pdf (Please do not think I expect you to read this,… -
lenli -
Replied to the thread the gnu linker bug for new version of segger.
Posthi: thank your reply. you,re right. According to the documentation, SEGGER_RTT_printf can be used. But there,re two question。 One problem is that the current SEGGER_RTT_printf formatting output has too many restrictions (such as outputting long… -
Chinnathun -
Replied to the thread Multiple programming IC RSL-10 from On semi.
Post*More information. I planned to use 5 Flasher Compact 5.19.00 with one PC. Could someone please confirm that I can connect all of the Flashers using a standard USB hub? -
SEGGER - SebastianB -
Replied to the thread Formatting options have disappeared since 8.12... and GIT no longer works.
PostHello, Thank you for your inquiry. 1) The built-in formatter is based on clang and as such supports all options available there. Previously most of these were listed each, but to support all current and future commands this was changed to the single… -
Marko -
Posted the thread Make RTT channel in JLinkRTTClient Configurable.
ThreadGreetings! I have a (hopefully) small feature request: could the choice of the RTT channel in the JLinkRTTClient CLI tool become configurable? Currently it is hardcoded to the channel 0 and there is no way to see messages on the channel 1 with this… -
SEGGER - SebastianB -
Replied to the thread Debug in SEGGER_RAM.
PostHello, Thank you for your inquiry. The attachment unfortunately did not work, what is the exact error message? The issue may be related to an incorrect project configuration. We generally recommend to use a CPU support package when first setting up a… -
SEGGER - SebastianB -
Replied to the thread the gnu linker bug for new version of segger.
PostHello, Thank you for your inquiry. Most likely the library I/O type is not correctly set in the project. Please take a look here for more information: https://wiki.segger.com/Embedded_Studio_Library_IO Best regards, SebastianB -
SEGGER - SebastianB -
Replied to the thread is SES old version still avaialble?.
PostHello, Thank you for your inquiry. All older versions up until V4.10 may be found on our website: segger.com/downloads/embedded-studio/ Best regards, SebastianB -
SEGGER - SebastianB -
Replied to the thread Creating relocatable image file.
PostHello, Thank you for your inquiry. I am not completely sure whether I understand you correctly. Could you please elaborate what you are trying to do? Are the applications in B and C simply mirrored or do they differ in some way? Should both… -
Chinnathun -
Posted the thread Multiple programming IC RSL-10 from On semi.
ThreadHello, I can now burn firmware on individual IC RSL-10 from On semi by using J-LINK BASE, and I intend to expand my programming station to five targets. on program on this proposal, I am in need of a flasher/programmer. Would you kindly advise which… -
Eqqman -
Posted the thread Creating relocatable image file.
ThreadHello- We have a project using a bootloader on the STM32F411. Splitting the flash memory section into sections 'A' and 'B' and keeping the bootloader and application as separate projects (yes, there are ways to combine it, but we're not doing that for… -
eagleunlock98 -
Now follows SEGGER - Niklas.
Follow -
lhz412 -
Posted the thread is SES old version still avaialble?.
ThreadHello there, My old project need maintains and it doesn't compatible with the newer SES version. Is there a place I still can download the older version? Thank you very much,