Recent Activities

Hi, We're using the ST Secure Manager on a board with the STM32H573 micro. Without the Secure Manager installed on the board, we can use the j-link & IAR to download & debug without any problem. However, once we install the Secure Manager onto the…

Hi Hendrik, since emNet V3.58.0 the setsockopt() option SO_BINDTODEVICE is supported which allows you to bind sockets to a particular interface.

Hi, i have another question: What is the preffered way to bind a socket to a specific Interface? Background: We want to have several VLAN-Interfaces and want to send traffic from different applications in different vlans. Best regards

Thanks, Alex. I hope fixing that issue does not take much time

Hi! I purchased a J-Link EDU Mini when I was in school; it was sometime around 2017. I was wondering if there are limitations on what MCUs it can connect to? I purchased an STM32H755ZI devboard which has a Cortex M7 and M4; it is unable to connect to…

Hi, thank you for providing the details. It appears to be the case that Ozone somehow swallows the upper 32 bits of the registers D16..D31. We will need to have a closer look for reproducing the issue locally. Best regards -- AlexD

Hi Namklak, please use the he context menu of the terminal window for deselect the respective options and close the terminal window. Further details can be found in the description of the terminal window in the Ozone user's manual. Best regards -- AlexD

Hi Is it possible via any form of software configuration to change the Chip Select pin to be active high instead of active low for flash programming via JFlash SPI? segger.com/products/debug-probes/j-link/tools/j-flash-spi/

I stay tuned and looking forward to Ozone results. Regards AlfredJodaQuak

I am trying to enhance a firmware package provided by Qorvo, which uses the Segger IDE for development. 1. the .h files are not shown in the project file tree.. but I need to examine/change them as I am writing new code to add function. I assume this is…

Hello! There is strange behaviour observed when debugging Cortex-A7 IMX6ULL processor. Application loading and debugging fine, but only until i opened Generic Timer peripheral from CP15 menu. After that debugging practically breaks, user no longer able…

Hello, Alex. Yes, indeed i'am using .svd file from Ozone installation: C:/Program Files/SEGGER/Ozone V3.38a/Config/CPU/Cortex-A7.svd Board i'am working with is MYS-6ULX Single Board Computer from MYIR, i don't have any evaluation board, sorry. .log…

Hi Vlad, thanks for letting us know. We are not aware of such an issue. Which SVD file are you using? Is it `Cortex-A7.svd` that is coming with Ozone? Are you able to reproduce the issue on an eval board? If so: which one? Could you please provide a…

Ugh. Wow. So I guess I need to use J-Link RTT Viewer - how do I disable the Ozone Terminal?

Hello While debugging MIMX9352_A55_0 it works fine while trying to get into debug mode for MIMX9352_A55_1 i get failed to Connect to target message I have attached the image of the error message clearly

Hello! Using latest Ozone (v3.38a) debugging .elf application for IMX6ULL (Cortex-A7), the second part of double precision registers (D16 to D31) are displayed incorrectly: forum.segger.com/index.php/Att…c543b243c0998fa89b830bbe6 It seems only lower 32…

you can see that in the image of the project file startup script

Hi AndyR, on which device, exactly do you observe that behavior? We shall try to reproduce locally. Best regards -- AlexD

H Namklak, Ozone does not support sending such control characters to the target. Best regards -- AlexD

SystemView: Yes, I've been using it on 15.0.1 but have yet to try it on 15.1 (it was only just updated). I haven't tried Ozone yet, but I'll try that and let you know how it goes.