Recent Activities
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
SEGGER - Simon -
Replied to the thread J-Scope and C++-20 feature std::strong_ordering.
PostHello, Thank you for reaching out. At present, the data type you inquired about is not supported. We have added this to our Todo. However, as this is the first issue of its kind, we are unable to provide an estimated timeline for implementation. We… -
ssravindhar -
Posted the thread Is there any possibility for give Object or Variables name array format like ID_TEXT[1] or ID_VAR_[0],ID_VAR_[1],etc.
ThreadHi guys, In my project I am using 4 same type of screen need to display same type of data like temperature , sensor value ,etc. I received data from sensors array format example sensor_data[4] . So currently I need to set value using settext function… -
ssravindhar -
Replied to the thread AppWizard Inside Single Screen creating object or windows have any limitation ???.
PostHi Florian , Any solution for this issue ? Because of this single screen 100+ window concept or not .my display Initial load takes more then a minute. So if you have any idea pls let me know . Thanks & Regard Ravi.S -
SEGGER - Simon -
Replied to the thread when reparsing, j-scope cannot match array member variables?.
PostHello, Normally, J-Scope should be able to match the variable. I just checked myself and could not see any issues. For further investigation, could you please create a ticket for this issue: segger.com/support/technical-support/ The ticket should… -
SEGGER - Simon -
Replied to the thread JScope fails to find RTT block.
PostHello, I can not see any possible issues in your picture. For further investigation, could you please create a ticket for this issue: segger.com/support/technical-support/ The ticket should contain the following information: 1. Serial number of your… -
remcopoelstra -
Replied to the thread JScope fails to find RTT block.
PostHi, Please find it attached. -
SEGGER - AlexD -
Replied to the thread freeRTOS plugin column naming.
PostHi Fraengers, Thank you for your suggestions regarding the column naming. I will present them in our next internal meeting where we discuss future improvements. At this point in time I cannot comment on whether this will be implemented and if yes,… -
andrewsglenn -
Posted the thread JLinkGDBServerCL connects, Ozone does not.
ThreadNXP LPC54S018 Development board (LPCXpresso54S018) Using the NXP IDE with my J-Link Plus Compact, I get connection errors, so I thought I'd try with Ozone. The JLinkGDBServerCL commandline is as follows: 'C:\Program… -
fraengers -
Posted the thread freeRTOS plugin column naming.
ThreadI want to suggest a more clear naming of the stack info column of the freeRTOS plugin or a change of the shown data, to avoid misconception. Right now it shows free stack / total stack, as I found out after too long of time. I expected it to show used… -
SEGGER - Simon -
Replied to the thread JScope fails to find RTT block.
PostHello, I am not able to see your screenshot. Could you please try to re-upload it? Best regards, Simon -
aessayli -
Replied to the thread [SOLVED] Issue when connecting to chain with multiple TAPs.
Postgot a response via support channel -
lenli -
Posted the thread the gnu linker bug for new version of segger.
Threaddear: now i am use the segger studio of v7.3. the gnu linker is used for cortex-m33 but this is some error like "prinops.c:(.text.libc.vfprintf_l+0x5c): undefined reference to `__SEGGER_RTL_vfprintf'". and segger linker is ok。 how to solver this… -
andrew.parlane -
Posted the thread JLink firmware and support/maintenance periods.
ThreadWe recently ran into an issue and when searching found this thread: [SOLVED] old firmware module that does not handle I/D-cache correctly All of our units that we've looked at so far have host/emu FW 2022 Sep 22 15:00, despite some of these units being… -
pbizzarri -
Replied to the thread Enable SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) with Jlink Ultra+ causes debugger disconnection and microcontroller in stuck (power cycle is necessary for recovery).
PostHi Alex Thanks for reply Attached full logs as you requested -
pbizzarri -
Replied to the thread [SOLVED] SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) in Renesas demoboard doesn't work using Jlink Ultra+ and instead works with J-Link OB-S124 embedded in demoboard.
PostHi Alex. You are right! I used J-Link Configurator to set max SWO speed to 1MHz, and with the same scenario i saw from jlink log that now TPIU_ACPR is set to 99 (so clock prescaler 100, so from 100MHz SWO pin clock is 1MHz) and now it works!! So, my… -
aessayli -
Posted the thread [SOLVED] Issue when connecting to chain with multiple TAPs.
ThreadHello, I have sent this as a support ticket but had no response since May 15, I will post it here again. we are trying to use the jlink debugger to debug our custom SoC. Our JTAG chain contains 2 taps: each one connected to a separate Risc-V processor.… -
Steve Sun -
Replied to the thread Can not halt m4 on AM572x evaluation module by JTrace..
PostHi, Alex Thanks very much. I will try my best to understand what you are saying and try again. Best regards, Steve Sun -
ninevoltz9 -
Replied to the thread [SOLVED] J-Trace Pro not functioning correctly over USB.
PostAlex, I sent you the serial number in a pm. -
SEGGER - Alex -
Replied to the thread [SOLVED] J-Trace Pro not functioning correctly over USB.
PostCan you please PM me the S/N of your J-Trace unit?