Recent Activities
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
SEGGER - Til -
Replied to the thread API OS_InInterrupt() doesn't work if called inside function called by OS SW timer.
PostHello, This is not an embOS bug, but it works as intended. OS_INT_InInterrupt() returns 1 only when called from an embOS interrupt routine. From any other context, like embOS software timer, it returns 0. With Cortex-M embOS software timers are… -
pbizzarri -
Replied to the thread Enable SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) with Jlink Ultra+ causes debugger disconnection and microcontroller in stuck (power cycle is necessary for recovery).
PostHi Alex Any updates from the log posted? do you think i have to create an issue ticket for this? Thanks in advance -
pbizzarri -
Posted the thread API OS_InInterrupt() doesn't work if called inside function called by OS SW timer.
ThreadWe are using OS version: V5.18.0.3 We have a function that uses mutex, and it is used inside tasks and in ISR function. In order to avoid OS error, mutex usage is under condition, checking if caller is in task execution or in ISR exection, using API… -
SEGGER - AlexD -
Replied to the thread freeRTOS plugin column naming.
PostHi fraengers, thank you for providing the reproducer. I just checked and conclude that right now we are not able to fix that inconvenience. The impact is zero anyway, since the scripts for Cortex-M4 and Cortex-M7 are identical except a comment. Please… -
Chiranth Murthy -
Now follows SEGGER - Simon.
Follow -
SEGGER - Simon -
Replied to the thread Support for STM32U083KC.
PostHello, The device is already supported. See the link below: SEGGER Supported Devices - ST Best regards, Simon -
fraengers -
Replied to the thread freeRTOS plugin column naming.
PostNew Project Wizard => STM32H743VI => use attached elf file => apply suggested freertos plugin addition Console shows CM4 plugin was loaded. While you have already loaded the elf file, please observe the global variables view having a problem with… -
jlefevre -
Posted the thread Erasing A Sector That Isn't In .bin File Via Command-Line.
ThreadChip: STM32H753VI Flasher hardware: JLink Plus JFlash version: v6.54 (for compatibility reasons) .bin file writes from 0x08000000 to 0x0806C580 I can flash the chip successfully by calling J-Flash from the command line. However, I need to wipe the… -
SEGGER - Simon -
Replied to the thread J-Scope and C++-20 feature std::strong_ordering.
PostHello, Thank you for reaching out. At present, the data type you inquired about is not supported. We have added this to our Todo. However, as this is the first issue of its kind, we are unable to provide an estimated timeline for implementation. We… -
ssravindhar -
Posted the thread Is there any possibility for give Object or Variables name array format like ID_TEXT[1] or ID_VAR_[0],ID_VAR_[1],etc.
ThreadHi guys, In my project I am using 4 same type of screen need to display same type of data like temperature , sensor value ,etc. I received data from sensors array format example sensor_data[4] . So currently I need to set value using settext function… -
ssravindhar -
Replied to the thread AppWizard Inside Single Screen creating object or windows have any limitation ???.
PostHi Florian , Any solution for this issue ? Because of this single screen 100+ window concept or not .my display Initial load takes more then a minute. So if you have any idea pls let me know . Thanks & Regard Ravi.S -
SEGGER - Simon -
Replied to the thread when reparsing, j-scope cannot match array member variables?.
PostHello, Normally, J-Scope should be able to match the variable. I just checked myself and could not see any issues. For further investigation, could you please create a ticket for this issue: segger.com/support/technical-support/ The ticket should… -
SEGGER - Simon -
Replied to the thread JScope fails to find RTT block.
PostHello, I can not see any possible issues in your picture. For further investigation, could you please create a ticket for this issue: segger.com/support/technical-support/ The ticket should contain the following information: 1. Serial number of your… -
remcopoelstra -
Replied to the thread JScope fails to find RTT block.
PostHi, Please find it attached. -
SEGGER - AlexD -
Replied to the thread freeRTOS plugin column naming.
PostHi Fraengers, Thank you for your suggestions regarding the column naming. I will present them in our next internal meeting where we discuss future improvements. At this point in time I cannot comment on whether this will be implemented and if yes,… -
andrewsglenn -
Posted the thread JLinkGDBServerCL connects, Ozone does not.
ThreadNXP LPC54S018 Development board (LPCXpresso54S018) Using the NXP IDE with my J-Link Plus Compact, I get connection errors, so I thought I'd try with Ozone. The JLinkGDBServerCL commandline is as follows: 'C:\Program… -
fraengers -
Posted the thread freeRTOS plugin column naming.
ThreadI want to suggest a more clear naming of the stack info column of the freeRTOS plugin or a change of the shown data, to avoid misconception. Right now it shows free stack / total stack, as I found out after too long of time. I expected it to show used… -
SEGGER - Simon -
Replied to the thread JScope fails to find RTT block.
PostHello, I am not able to see your screenshot. Could you please try to re-upload it? Best regards, Simon -
aessayli -
Replied to the thread [SOLVED] Issue when connecting to chain with multiple TAPs.
Postgot a response via support channel -
lenli -
Posted the thread the gnu linker bug for new version of segger.
Threaddear: now i am use the segger studio of v7.3. the gnu linker is used for cortex-m33 but this is some error like "prinops.c:(.text.libc.vfprintf_l+0x5c): undefined reference to `__SEGGER_RTL_vfprintf'". and segger linker is ok。 how to solver this…