Recent Activities
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
ssravindhar -
Posted the thread Is there any possibility for give Object or Variables name array format like ID_TEXT[1] or ID_VAR_[0],ID_VAR_[1],etc.
ThreadHi guys, In my project I am using 4 same type of screen need to display same type of data like temperature , sensor value ,etc. I received data from sensors array format example sensor_data[4] . So currently I need to set value using settext function… -
ssravindhar -
Replied to the thread AppWizard Inside Single Screen creating object or windows have any limitation ???.
PostHi Florian , Any solution for this issue ? Because of this single screen 100+ window concept or not .my display Initial load takes more then a minute. So if you have any idea pls let me know . Thanks & Regard Ravi.S -
SEGGER - Simon -
Replied to the thread when reparsing, j-scope cannot match array member variables?.
PostHello, Normally, J-Scope should be able to match the variable. I just checked myself and could not see any issues. For further investigation, could you please create a ticket for this issue: segger.com/support/technical-support/ The ticket should… -
SEGGER - Simon -
Replied to the thread JScope fails to find RTT block.
PostHello, I can not see any possible issues in your picture. For further investigation, could you please create a ticket for this issue: segger.com/support/technical-support/ The ticket should contain the following information: 1. Serial number of your… -
remcopoelstra -
Replied to the thread JScope fails to find RTT block.
PostHi, Please find it attached. -
SEGGER - AlexD -
Replied to the thread freeRTOS plugin column naming.
PostHi Fraengers, Thank you for your suggestions regarding the column naming. I will present them in our next internal meeting where we discuss future improvements. At this point in time I cannot comment on whether this will be implemented and if yes,… -
andrewsglenn -
Posted the thread JLinkGDBServerCL connects, Ozone does not.
ThreadNXP LPC54S018 Development board (LPCXpresso54S018) Using the NXP IDE with my J-Link Plus Compact, I get connection errors, so I thought I'd try with Ozone. The JLinkGDBServerCL commandline is as follows: 'C:\Program… -
fraengers -
Posted the thread freeRTOS plugin column naming.
ThreadI want to suggest a more clear naming of the stack info column of the freeRTOS plugin or a change of the shown data, to avoid misconception. Right now it shows free stack / total stack, as I found out after too long of time. I expected it to show used… -
SEGGER - Simon -
Replied to the thread JScope fails to find RTT block.
PostHello, I am not able to see your screenshot. Could you please try to re-upload it? Best regards, Simon -
aessayli -
Replied to the thread Issue when connecting to chain with multiple TAPs.
Postgot a response via support channel -
lenli -
Posted the thread the gnu linker bug for new version of segger.
Threaddear: now i am use the segger studio of v7.3. the gnu linker is used for cortex-m33 but this is some error like "prinops.c:(.text.libc.vfprintf_l+0x5c): undefined reference to `__SEGGER_RTL_vfprintf'". and segger linker is ok。 how to solver this… -
andrew.parlane -
Posted the thread JLink firmware and support/maintenance periods.
ThreadWe recently ran into an issue and when searching found this thread: [SOLVED] old firmware module that does not handle I/D-cache correctly All of our units that we've looked at so far have host/emu FW 2022 Sep 22 15:00, despite some of these units being… -
pbizzarri -
Replied to the thread Enable SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) with Jlink Ultra+ causes debugger disconnection and microcontroller in stuck (power cycle is necessary for recovery).
PostHi Alex Thanks for reply Attached full logs as you requested -
pbizzarri -
Replied to the thread [SOLVED] SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) in Renesas demoboard doesn't work using Jlink Ultra+ and instead works with J-Link OB-S124 embedded in demoboard.
PostHi Alex. You are right! I used J-Link Configurator to set max SWO speed to 1MHz, and with the same scenario i saw from jlink log that now TPIU_ACPR is set to 99 (so clock prescaler 100, so from 100MHz SWO pin clock is 1MHz) and now it works!! So, my… -
aessayli -
Posted the thread Issue when connecting to chain with multiple TAPs.
ThreadHello, I have sent this as a support ticket but had no response since May 15, I will post it here again. we are trying to use the jlink debugger to debug our custom SoC. Our JTAG chain contains 2 taps: each one connected to a separate Risc-V processor.… -
Steve Sun -
Replied to the thread Can not halt m4 on AM572x evaluation module by JTrace..
PostHi, Alex Thanks very much. I will try my best to understand what you are saying and try again. Best regards, Steve Sun -
ninevoltz9 -
Replied to the thread [SOLVED] J-Trace Pro not functioning correctly over USB.
PostAlex, I sent you the serial number in a pm. -
SEGGER - Alex -
Replied to the thread [SOLVED] J-Trace Pro not functioning correctly over USB.
PostCan you please PM me the S/N of your J-Trace unit? -
SEGGER - Alex -
Replied to the thread [SOLVED] SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) in Renesas demoboard doesn't work using Jlink Ultra+ and instead works with J-Link OB-S124 embedded in demoboard.
PostNot being able to specify the SWO speed is bad… Having it on “max possible” is OK but not being able to change that setting is a bad thing because different models have different max. speeds May be worth opening a ticket at Renesas for this because it…