Posts by ers-limited

Hi,

Sorry for the late reply, I was traveling and could not test on a windows VM.

With SEGGER Embedded Studio it seems to work with the example project.
Surprisingly after Testing with SEGGER Embedded Studio i could once download also with ATMEL Studio 7.0.
But then got breakpoint errors.

Trying again to debug with ATMEL Studio failed then again. First with a error that the Programmer is not avialable.
Which really was detached from the Virtual machine. Probably the USB identifier of the SEGGER-ICE
gets changed during download or something. Directly followed again by a DP register 0x2 Error.

Best regards, Simon

Hi,

This Problem was already reported in this Forum before but only solved with some magic.
J-link SAM4L-EK error "Failed to launch program. Error: Failed to write DP register 0x2"

We have the same Problem now:
Error: Failed to write DP register 0x2

We are not using the evaluation kit but the ATSAM4LC8C.
The SAM-ICE is a new Version.
Programming and debugging with JLinkExe and JLinkGDBServer works but not with ATMEL Studio V7.0.