Posts by Akshitha

Hello,

We are currently working on toggling a GPIO pin on the STM32MP257F-DK board using the Cortex-M33 core, with Segger Embedded Studio (SES) version 8.22a.
We are able to toggle the GPIO as expected. However, we are encountering an issue when attempting to observe the corresponding memory values. Specifically, when we open the memory window in SES to check the GPIO register values, we are unable to view the memory content.
To provide better clarity on the issue, we have attached a file illustrating the memory access problem we are facing.

Thanks & Regards
Akshitha pattem

Hello

We are trying to debug M33 Core in SEGGER EMBEDDED STUDIO(V8.22a).But it returns could not find core in CoreSight SetupError .
For your reference, I have attached the error log file that details the issue.We would appreciate it ,if you could review the attached file and provide guidance or suggestions on how to resolve this problem.

Thanks & Regards
Akshitha Pattem

Hello

We are trying to debug Cortex-A35 using SEGGER EMBEDDED STUDIO(V8.22a).But we get an error " Error while scanning ROM table Could not determine core debug registers + core CTI. Debugging not possible" .Please refer the attached Screenshot of the error for details.

Hello

We are planning to work on STM32MP257F Processor. We would like to know if we can debug the Cortex A-35 using J-LINK base in SEGGER EMBEDDED STUDIO

Thanks & Regards
Akshitha Pattem

Hello

While debugging MIMX9352_A55_0 it works fine while trying to get into debug mode for MIMX9352_A55_1 i get failed to Connect to target message

I have attached the image of the error message clearly