Hi nino,
I do not think this is a problem on the J-Link side, since this error occurs even before Sourcery G++ is trying to connecting to J-Link.
I had the same problem first, but after playing with the options in the "Debugger" dialog this problem was suddenly gone and not reproducible anymore.
J-Link in Sourcery G++ is working fine now.
It seems it depends on which order the settings in the dialog are configured...strange.
- Kevin -
Hello Tobias,
I have tried out the new J-Link software version and it works.
Many thanks for the support.
-Kevin-
Hi,
there's a problem with J-Link and the IAR Workbench when I try to debug a LPC2148 in the IAR.
When I try to start a debug session with Ctrl. + D, I get the following error message from J-Link:
If I follow the instructions from the error message and disconnect/reconnect the J-Link and try to restart the debug session, I get this error message:
I have:
IAR Embedded Workbench V4.30A using J-LinkARM DLL V.2.60c
SEGGER J-Link V6
Any ideas what's going wrong?
-Kevin-
