[SOLVED] Jlink for TT21100 and STM32F28033

    Hi all,

    I have 2 queries:
    1. Does Jlink support the programming for Parade Tech TT21100?
    2. I see that STM32F28033 is not listed as supported by Jlink. Does it mean I cannot use Jlink to program a STM32F28033?

    Thanks.

    Hello,

    1. The J-Link currently does not support debugging or programming the Parade Tech TT21100.
    You may consider adding support yourself using the J-Link Device Support Kit (DSK) or contact SEGGER to implement the support for you.

    2. The STM32F2 series from ST is supported by J-Link, but I could not find any documentation on the STM32F28033.
    Could you provide a link to such documentation?
    This would allow me to verify if the STM32F28033 belongs to the STM32F2 series from ST and if it is supported by J-Link.

    Best regards,
    Simon

    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: https://www.segger.com/ticket/
    Or you can contact us via e-mail.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login