[SOLVED] What is the CLI for flash the R7FA2E1A9

Dear All,

Currently, I'm using the JFlash-Lite 7.98h program R7FA2E1A9 chip with HBE1S.srec file. How to program the R7FA2E1A9 chip using CLI?

Information captured using JFlash-Lite program chip as below.

Connecting to J-Link...
Bank selection: BankAddr=0x01010010 Disabled
Bank selection: BankAddr=0x00000000 Disabled
Bank selection: BankAddr=0x40100000 Disabled
Loader selection: BankAddr=0x01010010 Loader=Default
Loader selection: BankAddr=0x00000000 Loader=Default
Loader selection: BankAddr=0x40100000 Loader=Default
Connecting to target...
Erasing...
Done.
Selected file: C:\Users\HB2E1S\Documents\R7FA2E1A9_HB2E1S\HB2_E1S_1v10.srec
Data file contains 3 memory ranges:
#0: 0x00000000 - 0x0001FFFF (128 KB)
#1: 0x01010010 - 0x0101003F (48 Bytes)
#2: 0x40100000 - 0x40100FFF (4 KB)
Connecting to J-Link...
Bank selection: BankAddr=0x01010010 Disabled
Bank selection: BankAddr=0x00000000 Disabled
Bank selection: BankAddr=0x40100000 Disabled
Loader selection: BankAddr=0x01010010 Loader=Default
Loader selection: BankAddr=0x00000000 Loader=Default
Loader selection: BankAddr=0x40100000 Loader=Default
Connecting to target...
Downloading...
Done.

Thank you.

Thank you so much, HaJoCC.

It works as expected.