[SOLVED] Support for esp32-c3 (and esp32 in general)

I will receive some esp32-c3 boads from mouser in the next days

http://www.mouser.com/ProductDetail/…2-c3-devkitm-1/

Is support for those risc-v based new chipsets planed for gdbserver and ozone?

Also, as mentioned in other threads, native support for the original esp32 chips (without openocd) would also be nice, preferably also in Ozone, but i can imagine this is a bigger task.

Michael

Thank you very much, my boards arrived today and there was an addendum sheet stating that there are known issues with jtag debugging.