[SOLVED/OR] J-Flah SPI with Flasher-Arm in Stand Alone Mode

enz · June 10, 2016 at 10:03 AM

Hi Segger Team,

yesterday I was on site at one of my customers to install/setup their new Flasher-Arm for production programming of a Spansion S25FL128S SPI-Flash using J-Flash-SPI.

Programmnig works fine, but I could not figure out how to get the stand alone mode to work with J-Flash SPI.

It seems, that currently the stand alone mode can only be configured via J-Flash, which does not support SPI devices.
Trying to "cheat" by loading the project file created by J-Flash SPI with J-Flash resulted in an error message about an invalid flash device when trying to download the config and data to the Flasher-ARM.

Maybe I did something wrong.
Or is this feature not yet available ?

Best regards,
Martin

SEGGER - Niklas · June 14, 2016 at 8:48 AM

Hi Martin,

standalone Mode support for direct SPI programming (what J-Flash SPI does) is on our internal ToDo, but whithout a fixed release date yet.
We plan to release is it towards the end of Q3/2016.

Best regards,
Niklas

enz · June 16, 2016 at 11:37 AM

Hi Niklas,

thanks for the info.

Curiously waiting for this release.

Best regards,
Martin

YvesB · October 25, 2016 at 11:18 AM

Hello,
any news about SPI standalone programming using the segger flasher portable?
regards,
Yves

SEGGER - Niklas · November 30, 2016 at 11:08 AM

Hi all,

Sorry to say but stand-alone mode support for J-Flash SPI is still not available. Too many other open paid projects / projects with higher priority. Stand-alone mode support for J-Flash SPI has been reschedule to Q1 2017.

We will update this thread, once the feature is available.

Best regards
Niklas

[SOLVED/OR] J-Flah SPI with Flasher-Arm in Stand Alone Mode

Participate now!

Users Viewing This Thread