Friday, April 20th 2018, 12:44pm UTC+2

You are not logged in.

  • Login
  • Register

Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

wolf4124

Beginner

Date of registration: Sep 28th 2017

Posts: 2

1

Sunday, April 15th 2018, 10:50pm

STM32 with SSD1963

Hello,


in the past i got a answer how to use STemwin with a SSD1963 controller.
Now it was able for me to connect and control the SSD1963.


Here my system
-STM32F103VET6 (CZ miniSTM32F103V_-EX-Board)
-TFT 7 Zoll with SSD1963
-TFT connected over FSMC with 16 bit data and the control signals (REST, RS, CS, RD, WR) the MCU


It was able for me to init (call the function "LCD_Init()" direct)
and write in the memory (call the function "LCD_Fill(0xFFE0)" for yellow)
of the SSD1963 to colored the whole screen in yellow color.
==> Connection should work.


But is was not able for me to adapt STemwin in my system.
I found out after call "GUI_Init();" the function "LCD_X_DisplayDriver" got only on call with the value "LCD_X_SETORG".
No initialisation (LCD_X_INITCONTROLLER) of the tft ("LCD_Init()") is performed.
The SysTick_Handler is called periodically.


Maybe someone can give me a tip.


Thanks


Bernhard
wolf4124 has attached the following file:
  • Upload.zip (44.56 kB - 10 times downloaded - Last download: Today, 12:40am)

golf2109

Beginner

Date of registration: Nov 26th 2017

Posts: 5

2

Sunday, April 15th 2018, 11:11pm

This post has been edited 3 times, last edit by "golf2109" (Apr 15th 2018, 11:13pm)