uriy Community Member

  • Member since Jul 30th 2020
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • uriy -

    Replied to the thread [SOLVED] OpenFlashLoader ARM926EJ-S and NAND flash.

    Post
    I'm moving forward, but still have no luck. My device described as C Source Code (17 lines)you can see page size is set as 0x800. But when I press connect in J-Flash I see message like on attached picture. Why it happens?
  • uriy -

    Replied to the thread [SOLVED] OpenFlashLoader ARM926EJ-S and NAND flash.

    Post
    Where it's better to put functions like PLL and peripheral clocking initialization? In source codes inside Init function or inside script file for Jlink?
  • uriy -

    Replied to the thread [SOLVED] OpenFlashLoader ARM926EJ-S and NAND flash.

    Post
    I have several question about OpenFlashLoader 1. I created FLM file for my MCU in KEIL and add my device in JLinkDevices.xml. J-Flash succesfully connect to my MCU. But when I try to perfrom any operation I see: - ERROR: Can not read register 0 (R0)…
  • uriy -

    Posted the thread [SOLVED] OpenFlashLoader ARM926EJ-S and NAND flash.

    Thread
    Hello, You need to distinguish between 2 builds for your flash loader: 1) Debug The debug build should have a startup etc. so that you initialize SP etc. and are able to debug your flash loader. 2) Release The release build should not rely on any…