fionut Community Member

  • Member since Apr 22nd 2020
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • fionut -

    Replied to the thread JLINK plus not working with XMCFlasher.

    Post
    Hello Thank you for your support. Both statements are correct. Yes I wrote that with one hardware (JLINK Plus) and one software (XMCFlasher), I (or the JLINK) can not connect to target. The same hardware and another software (JLink commander) can…
  • fionut -

    Replied to the thread [SOLVED] erasing and loadbin.

    Post
    Thank you. That was helpfull
  • fionut -

    Posted the thread JLINK plus not working with XMCFlasher.

    Thread
    Hello I have purchased a JLINK plus compact having much hope that it would behave better that the cheaper Jlink OB found on XMCBootkit. After much trouble with the XMCBootkit , now I am facing new problems with the JLINK plus. First : JLINK Plus does…
  • fionut -

    Posted the thread [SOLVED] SWD isolator power.

    Thread
    Hello I have got a JLink plus and SWD isolator From the User manual UM08021-R1, I understand that I can power the target from J-Link via SWD isolator "The target side draws power from pins 1 or 2, the emulator side draws power from pin 19. " Pins 1 or 2…
  • fionut -

    Posted the thread [SOLVED] erasing and loadbin.

    Thread
    Hello I have observed from log files that when I execute from script file the loadbin command, Jlink also does a checkup if the binfile is already in MCU flash memory; then it is erasing it, andthen it programs the bin file; after that it checks again…
  • fionut -

    Posted the thread [SOLVED] Jlink log file structure.

    Thread
    I have two XMC MCUs (XMC1302 and XMC1202) and I want to program them automatically. First I change BMI from ASC_BSL to SWD0, then I erase them and flash them. Initially I have used the process exit code , but that was not relevant. I was getting exit…