victorp Beginner

  • Member since Jan 21st 2020
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • victorp -

    Replied to the thread [SOLVED] S32K144 d-flash programming failure.

    Post
    Fabian, Sorry for the late reply. I suppose it can be closed (is there a way for me to close it?). The only thing I wish is that the J-Link error message to be more clear. Best, Victor
  • victorp -

    Replied to the thread [SOLVED] S32K144 d-flash programming failure.

    Post
    Fabian, Thank you for the answer. I am downloading an S-rec file. The address information is correct. In case of success (no eeprom) the file is programmed into the correct addresses. The "@ 0x00000000" J-Link reports seems to be an offset in the…
  • victorp -

    Posted the thread [SOLVED] S32K144 d-flash programming failure.

    Thread
    I work with the S32K144 device. I have a program linked against the lower half of FlexNVM (address range 0x10000000:0x10008000), and flash it with the J-Link loadfile command. When the FlexNVM is configured as D-flash only (no eerpom), everything works…