icwiener Beginner

  • Member since Jan 14th 2020
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • icwiener -

    Replied to the thread Import previously exported data graph in Ozone.

    Post
    Hi, I think I understand how snapshots are supposed to work now. Powerful tool. However, that's not what we would need. We would like to be able to fetch diagnostics data with a computer sitting in production and then let the analysis happen on…
  • icwiener -

    Posted the thread Ozone Data Sampling Number Formatting Inconsistent.

    Thread
    Hi, Ozone 3.10d here. In the Data Sampling view the numbers formatting is inconsistent. The small gap for thousands is there for some columns but e.g for the Average column, it is missing. The Changes column is weird as well. See screen shot. Best…
  • icwiener -

    Posted the thread Ozone Data Sampling Change Counter becomes negative.

    Thread
    Hi, Ozone 3.10d here. when a debugging session with Data Sampling lasts a bit longer, the "# Changes" counter overruns and starts counting negative numbers towards 0. The reason is that the Changes field seems to have the same data type as the watched…
  • icwiener -

    Replied to the thread Cannot quit Ozone after J-Link lost connection to target.

    Post
    Hi, now using 3.10d I just had this happeing to me right in the middle of a debugging session. No lost connection, no Windows hibernate. Ozone just stopped sampling data and now I can neither stop debugging nor quit the application. There is no output…
  • icwiener -

    Replied to the thread Import previously exported data graph in Ozone.

    Post
    Hi, if I understand snapshots correctly, they cannot store a time span from the timeline view. What I need is certain data from a machine while it runs for several minutes. We then look at that data to check it for unusual spikes or weird behaviour in…
  • icwiener -

    Replied to the thread J-Flash - Failed to erase chip.

    Post
    Hi, thanks for your suggestion. EDIT: Sorry, this seems to be an unrelated issue. I will update this post once I have new information. EDIT2: I just tried it again and the error is still as shown below. erase failes here after issuing that command.…
  • icwiener -

    Posted the thread Import previously exported data graph in Ozone.

    Thread
    Hi, I have been logging some data values for a machine over a period of time. Then I exported the Data Graphs with File -> Export -> Data Graphs... and wanted to open them on another computer. Since I could not find an option for that in Ozone, I…
  • icwiener -

    Replied to the thread [SOLVED] Ozone Watched Data with Default Refresh Rate?.

    Post
    Hi Nino, bummer that there is no way to give a default value to variables added there. Would save me a few clicks. But well, I just wanted to make sure I am not overlooking some option somewhere. Thanks for the clarification. Kind regards
  • icwiener -

    Replied to the thread Ozone File Scope function selector not always updated.

    Post
    Hi Nino, no inconvenience taken. Glad you could reproduce this. Kind regards
  • icwiener -

    Replied to the thread [SOLVED] Ozone Watched Data with Default Refresh Rate?.

    Post
    Hi Nino, thanks for your reply. What you describe acts on the Data Sampling and the Timeline views. What I mean is the Watched Data view. Variables entered there have a default refresh rate of Off which needs intervention for every singe variable added…
  • icwiener -

    Posted the thread [SOLVED] Ozone Watched Data with Default Refresh Rate?.

    Thread
    Hi, is it possible to have a default refresh rate for data points added to the Watched Data view? I would like to have the data updated at 1Hz when I add them. Kind regards
  • icwiener -

    Posted the thread Ozone File Scope function selector not always updated.

    Thread
    Hi, I am in a debugging session in V3.10c. On the left, I have the Functions view open and the editor window is shown in the center. The File Scope function selector at the upper end of the editor window lists the functions of the currently shown…
  • icwiener -

    Replied to the thread Cannot quit Ozone after J-Link lost connection to target.

    Post
    Hi, thanks for trying. Yes, I found the V3.10c shortly after writing and saw the issue with it as well. Surprised me that a one month old installation was outdated by several versions already. :) I have problems reproducing the behaviour quickly but…
  • icwiener -

    Replied to the thread Cannot quit Ozone after J-Link lost connection to target.

    Post
    Hi, I am running Ozone V3.10 (which is the most recent one) on Windows 10 Pro and this happened to me with a custom board (stm32f412ce) as well as with the blue pill (stm32f103c8t6). Both boards have an exteral power supply and if that goes away, Ozone…
  • icwiener -

    Replied to the thread J-Flash - Failed to erase chip.

    Post
    Hi, thanks for your answer. It is a custom board. I do not have an eval board at hand. I can test with one over the week end and will add the results here then. In J-Link Commander (connected via SWD), erasing finished successfully. Quote:…
  • icwiener -

    Posted the thread Cannot quit Ozone after J-Link lost connection to target.

    Thread
    Hi, when I am connected to a target and debugging in Ozone via J-Link Pro, and then the target is shut down or the connection is lost for some other reason, Ozone is stuck and cannot be used anymore. - Debug.Stop(); has no effect - trying to quit the…
  • icwiener -

    Posted the thread J-Flash - Failed to erase chip.

    Thread
    Hi, I am using J-Link Pro on an STM32F412 and I am trying to erase the chip with J-Flash. If I select Target -> Manual Programming -> Erase Chip, I get a pop-up dialog doing some work and then an error message pop-up telling me, erasing had failed. The…
  • icwiener -

    Replied to the thread [SOLVED] Live Expressions - Failed to evaluate expression.

    Post
    Hi Nino, thank you for your input. In Ozone, all values seem to be shown fine. I tried about 10 debug runs and every variable's value was shown in each run (amazingly fast, btw :)). Thanks, now I know where to look. :)
  • icwiener -

    Posted the thread [SOLVED] Live Expressions - Failed to evaluate expression.

    Thread
    Hi, I am developing for STM32F4 with Atollic True Studio using J-Link Pro as debug probe. In the Live Expressions tab I have about 10 expressions (which are simple variables). When starting debugging, sometimes all expressions are evaluated just fine…