icwiener Beginner

  • Member since Jan 14th 2020
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • icwiener -

    Replied to the thread [SOLVED] J-Flash - Failed to erase chip.

    Post
    Hi, if I create a new project for STM32F412CE , Bank0 and Bank1 are enabled. Is this expected? If so, everything works fine. Best regards
  • icwiener -

    Replied to the thread [SOLVED] J-Flash - Failed to erase chip.

    Post
    Hi, thanks for the hint and sorry for the delay .. busy times. :) In the Project Settings dialog I can see: - Bank0: Base Addr 08000000 - Bank1: Base Addr 90000000 If I understand it correctly, Bank1 is only an interface to an optional external flash?…
  • icwiener -

    Replied to the thread Cannot quit Ozone after J-Link lost connection to target.

    Post
    Hi, I just observed that after around 420 000 samples the Timeline view and the status bar (when Data Sampling or Timeline are selected) become rather slow and even stuck. The Data Sampling view is showing data just normal. I am running at a sampling…
  • icwiener -

    Replied to the thread Cannot quit Ozone after J-Link lost connection to target.

    Post
    Hi Nino, there is a watchdog but it did not hit. And we do not use any low-power modes. it does not happen regularly enough to answer if it happens around the same sampling number. I will check next time. The Data Limit configured is 16000 Best…
  • icwiener -

    Posted the thread Ozone Status Bar not Updated when Focus Lost.

    Thread
    Hi, when I am running a debugging session and the Ozone window loses focus, everything is still updated (data sampling, watched data) but the status bar is not. I am speaking about the sampling data on the right which appears when the Data Sampling view…
  • icwiener -

    Replied to the thread Ozone Data Sampling Number Formatting Inconsistent.

    Post
    Hi Nino, in my example it happens with uint16_t in C (stating ushort in the Type column in Ozone). I can also see it for int16_t (short). As shown on the screenshot, it does not happen with double. If I can observe something more, I will add it…
  • icwiener -

    Replied to the thread Import previously exported data graph in Ozone.

    Post
    Hi, I think I understand how snapshots are supposed to work now. Powerful tool. However, that's not what we would need. We would like to be able to fetch diagnostics data with a computer sitting in production and then let the analysis happen on…
  • icwiener -

    Posted the thread Ozone Data Sampling Number Formatting Inconsistent.

    Thread
    Hi, Ozone 3.10d here. In the Data Sampling view the numbers formatting is inconsistent. The small gap for thousands is there for some columns but e.g for the Average column, it is missing. The Changes column is weird as well. See screen shot. Best…
  • icwiener -

    Posted the thread Ozone Data Sampling Change Counter becomes negative.

    Thread
    Hi, Ozone 3.10d here. when a debugging session with Data Sampling lasts a bit longer, the "# Changes" counter overruns and starts counting negative numbers towards 0. The reason is that the Changes field seems to have the same data type as the watched…
  • icwiener -

    Replied to the thread Cannot quit Ozone after J-Link lost connection to target.

    Post
    Hi, now using 3.10d I just had this happeing to me right in the middle of a debugging session. No lost connection, no Windows hibernate. Ozone just stopped sampling data and now I can neither stop debugging nor quit the application. There is no output…
  • icwiener -

    Replied to the thread Import previously exported data graph in Ozone.

    Post
    Hi, if I understand snapshots correctly, they cannot store a time span from the timeline view. What I need is certain data from a machine while it runs for several minutes. We then look at that data to check it for unusual spikes or weird behaviour in…
  • icwiener -

    Replied to the thread [SOLVED] J-Flash - Failed to erase chip.

    Post
    Hi, thanks for your suggestion. EDIT: Sorry, this seems to be an unrelated issue. I will update this post once I have new information. EDIT2: I just tried it again and the error is still as shown below. erase failes here after issuing that command.…
  • icwiener -

    Posted the thread Import previously exported data graph in Ozone.

    Thread
    Hi, I have been logging some data values for a machine over a period of time. Then I exported the Data Graphs with File -> Export -> Data Graphs... and wanted to open them on another computer. Since I could not find an option for that in Ozone, I…
  • icwiener -

    Replied to the thread [SOLVED] Ozone Watched Data with Default Refresh Rate?.

    Post
    Hi Nino, bummer that there is no way to give a default value to variables added there. Would save me a few clicks. But well, I just wanted to make sure I am not overlooking some option somewhere. Thanks for the clarification. Kind regards
  • icwiener -

    Replied to the thread [SOLVED] Ozone File Scope function selector not always updated.

    Post
    Hi Nino, no inconvenience taken. Glad you could reproduce this. Kind regards
  • icwiener -

    Replied to the thread [SOLVED] Ozone Watched Data with Default Refresh Rate?.

    Post
    Hi Nino, thanks for your reply. What you describe acts on the Data Sampling and the Timeline views. What I mean is the Watched Data view. Variables entered there have a default refresh rate of Off which needs intervention for every singe variable added…
  • icwiener -

    Posted the thread [SOLVED] Ozone Watched Data with Default Refresh Rate?.

    Thread
    Hi, is it possible to have a default refresh rate for data points added to the Watched Data view? I would like to have the data updated at 1Hz when I add them. Kind regards
  • icwiener -

    Posted the thread [SOLVED] Ozone File Scope function selector not always updated.

    Thread
    Hi, I am in a debugging session in V3.10c. On the left, I have the Functions view open and the editor window is shown in the center. The File Scope function selector at the upper end of the editor window lists the functions of the currently shown…
  • icwiener -

    Replied to the thread Cannot quit Ozone after J-Link lost connection to target.

    Post
    Hi, thanks for trying. Yes, I found the V3.10c shortly after writing and saw the issue with it as well. Surprised me that a one month old installation was outdated by several versions already. :) I have problems reproducing the behaviour quickly but…
  • icwiener -

    Replied to the thread Cannot quit Ozone after J-Link lost connection to target.

    Post
    Hi, I am running Ozone V3.10 (which is the most recent one) on Windows 10 Pro and this happened to me with a custom board (stm32f412ce) as well as with the blue pill (stm32f103c8t6). Both boards have an exteral power supply and if that goes away, Ozone…