Akatosh Beginner

  • Member since Jan 14th 2020
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Akatosh -

    Posted the thread Start with SES stm32f103vc.

    Thread
    Hello, I recently started using SES (after using Keil). I tried to import an old project from keil to SES but it didn't work. So i tried to make a new project but i cant even get an LED blinking. I had tried the method from this topic: [SOLVED]
  • Akatosh -

    Replied to the thread Processor frezzes after Enabled the Interrupt source.

    Post
    Hello, I have changed the computer and now it works correctly. I don't know what was the reason, because before sample program was crashing and it is still mysterious for me. I tried to changed processor in project options and I found out that i don't…
  • Akatosh -

    Replied to the thread Processor frezzes after Enabled the Interrupt source.

    Post
    Thank you for replay I moved the program by the import. I didn't follow the troubleshooting yet. I checked now the sample solution and it compiled but after I run debug the program instantly goes to "HardFault_Handler". And I think that is only just…
  • Akatosh -

    Posted the thread Processor frezzes after Enabled the Interrupt source.

    Thread
    Hello, I moved project from Keil to Segger Embedded studio and now while i debugging my processor freezes after enabled the interrupt sources. When i used keil the whole program worked correctly. What can i do to make debug work correctly at Segger? I…