monjiemegoo Beginner

  • Member since Dec 2nd 2019
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • monjiemegoo -

    Posted the thread delay in touch detection.

    Thread
    hellow guys i have a stm32f103ve microcontroller with 72mhz maximum frequency and a 7inch tft lcd with a gt911 touch ic driver. i write three function for touch ic that iam sure this function work properly. one function for recognize detection and two…
  • monjiemegoo -

    Replied to the thread how to use touch in emwin.

    Post
    hellow dear florian thanks for repling me there is some steps in emwin user manual in chapter pointer input device for using touch. like Implementing the hardware routines with functions like GUI_TOUCH_X_ActivateX or GUI_TOUCH_X_MeasureX . and in follow…
  • monjiemegoo -

    Posted the thread emwin touchscreen.

    Thread
    hi can someone please upload an example that show how to config a touch screen in emwin and where configuration shoud done? and in example show how to use touch screen for a simple action like press a button. thanks
  • monjiemegoo -

    Posted the thread how to use touch in emwin.

    Thread
    hellow guys i have a stm32f103ve micro and a 7 inch tft lcd and a gt911 touch ic. i run emwin on my micro using ssd1963 ic driver and now i wanna add touchscreen in this system. i have some question about that: 1_is this possible that use emwin functions…
  • monjiemegoo -

    Posted the thread ssd1963 problem with stm32f103ve.

    Thread
    hellow guys i have a stm32f103ve micro and a ssd1963 ic driver for driving a 7 inch tft lcd. in a simple project i use ssd1963 with fsmc to run lcd and now iam shure my init function for ssd1963 will work good. now i wanna run emwin on this system. for…