SEGGER - Florian Administrator

  • Member since Oct 24th 2019

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Florian -

    Replied to the thread AppWizard APPW_CreateRoot Hard_Fault.

    Post
    Hi, in the Lib directory besides the M4 lib there is also a M7FP lib. Unfortunately there is no M4FP library. You could try both libraries to see which one works better for your hardware. Best regards, Florian
  • SEGGER - Florian -

    Replied to the thread AppWizard APPW_CreateRoot Hard_Fault.

    Post
    Hi, AppWizard is not compatible with an old emWin version like V5.32. The emWin version that should be used with the generated code is contained in the AppWizard version number. For example with AppWizard 1.28c, emWin 6.26c has to be used (see attached…
  • SEGGER - Florian -

    Replied to the thread Error in DECLARE_CREATE_FROM_STREAM after editing GUI.h.

    Post
    Hi Jan, This is odd indeed. Also, these are by far not the only lines in the emWin code where the ## is used in defines. So it cannot be the ## alone what causes this. But my guess is that the issue is caused by the IDE, so I would ask ST about this,…
  • SEGGER - Florian -

    Replied to the thread Error in DECLARE_CREATE_FROM_STREAM after editing GUI.h.

    Post
    Hi Jan, I believe STM32CubeIDE uses the GCC compiler. Does the compiler output build errors regarding this? Could you send me the errors that are output in your IDE's console window? Thanks and best regards, Florian
  • SEGGER - Florian -

    Replied to the thread Error in DECLARE_CREATE_FROM_STREAM after editing GUI.h.

    Post
    Hi Jan, I doubt that the tokenization feature (## in defines) is not supported by your compiler, we use a lot of different compilers to test our code and we never ran into any problems with this. Which compiler are you using? Best regards, Florian
  • SEGGER - Florian -

    Replied to the thread Error in DECLARE_CREATE_FROM_STREAM after editing GUI.h.

    Post
    Hi, By color definitions you mean the default color defines like GUI_BLUE, GUI_WHITE, and so on? I don't understand how changing these defines would have an impact on the macro that declares the streamed bitmap prototypes. At any rate, it is not a good…
  • SEGGER - Florian -

    Replied to the thread Problem with Swipelist and attached Dropdown.

    Post
    Hi, Thank you for reporting this issue, I am able to reproduce the issue. I will let you know once we have fixed this. Best regards, Florian
  • SEGGER - Florian -

    Replied to the thread emWin License.

    Post
    Hi, Yes, you may use AppWizard free of charge for commercial purposes, but this only applies to the AppWizard supplied by Renesas and only for Renesas devices like the RA6M3. Best regards, Florian
  • Hi, AppWizard does not include a BSP for the STM32F429ZGT6, are you using a custom BSP? If so, could you send me this BSP so that I can try to reproduce the issue on the hardware? Thanks! Best regards, Florian
  • SEGGER - Florian -

    Replied to the thread Lcd on AND OFF.

    Post
    Hi, The LCD can be turned on and off by sending the on/off command to the display driver callback: C Source Code (8 lines)Of course this requires the callback of your display driver to handle these commands. The LCDConf.c that we have for the RA6M3G…