SEGGER - Fabian Administrator

As Skvo correctly indicated, you are using a clone/cracked J-Link. Please note that the use of such a device in combination with our Software is illegal. We will close this thread now. BR Fabian

Hi, Connecting to the Apollo 3 devices should not trigger a reset by default, so connecting with the J-Link RTT Viewer should also not do so. Could you please 1) tell us what lead you to the conclusion that the device is reset on connect? 2) send us a…

Hi, Quote from Ouble: “Finally should I start a new thread if problems occur with loading and/or debugging the program onto the Due? Or should I ask in this thread? ” I think it is fine to stay in this thread regarding this. As it all concerns the…

Hi, From the message it seems like the VTref pin is not being powered on your setup. I guess that you have to change some jumper settings to enable connection to an external debug probe or similar. We recommend to check the board manual regarding…

Hi Maximilian, This is the first time we have heard about such an issue. 1) Did also turn to the MCUXpresso / NXP forum? 2) Could you please send us a J-Link log file? How to enable: wiki.segger.com/J-Link_DLL#Enable_J-Link_Log_File 3) Could you please…

Hi, A couple of things: 1) Please refrain from spamming in this forum. If you want to add information to the thread before anyone answered, please use the "Edit" function. I removed the other messages and included it to the original one. 2) J-Link V7.22…

Hi, the issue lies on SEGGER side here. Some month ago, Embedded Studio was adjusted to natively import RTT as library, when selected in the project options. The issue is that this may lead to building errors with projects that still include the old RTT…

Hi, Your question is not related to RTT but is concerning a general topic related to a general C and Assembler language. Please understand that this far exceeds the scope of the help we can provide in this Forum or in our support ticket system. I…

Hi, it seems like there might be some misunderstandings here. So I hope to clear them out with this post. 1) When is the ASM sub module used The ASM sub module contains an ASM variant of SEGGER_RTT_WriteSkipNoLock(). This function is used per default…

Hi, Sorry for the delay in response. It seems like I misjudged where the problem was originating from: J-Flash does not accept aliased areas but only the actual flash areas for programming. On the KW38 devices, the flash from 0x1000_0000 - 0x1004_0000…

Hi Marco, we were able to recreate the issue and fixed it internally. A fix will be part of the next J-Link Software version, planned for some time next week. Thank you for making this issue known to us. We are sorry for any inconvenience…