SEGGER - Fabian Administrator

The power pin is not enabled by default. Please refer to: wiki.segger.com/J-Link_Commander#Power Best regards, Fabian

Hi, We implemented a verbose mode option for J-Link Log files. Please refer to the following article: wiki.segger.com/J-Link_Command_Strings#SetLogVerbose BR Fabian

Update: Device support will be available with the next J-Link Software release (V7.92g) planned for Wednesday, next week (23-09-27). It will be available for download here: segger.com/downloads/jlink#J-L…twareAndDocumentationPack BR Fabian

Hi, R7FA6M5BG is currently only supported by Flasher. segger.com/supported-devices/search/R7FA6M5BG I will check internally, if there are plans to support this chips already. BR Fabian

Hi Florent, I just gave this a quick try on the STM32H735G-DK (STM32H735). I could not test it on an STM32H730, as there are no evaluation boards available as far as I know, but both should behave the same from a debug standpoint. On our side it worked…

Hi, Quote from mete: “I think the reflasher does not support st-link v3 boards ” Correct. Quote from mete: “will it support and how soon ? ” There are no plans to add reflash tool functionality for STLINK-V3 and it is unlikely that there will be…

Hi, Usually devices are locked when produced for release to prevent them from being read out. The i.MX534 for example has multiple debug modes which either require the correct key to be passed or disable debug access completely. I would be very surprised…

Hi, We will look into this and see if we want to adjust the code to prevent these warnings. However, we are currently fully booked with projects and this is the first request regarding this, so I cannot say when we will be able to look into this. I…