SEGGER - Fabian Administrator

  • Member since Aug 30th 2019
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Fabian -

    Replied to the thread What does "Force go on connect" do in RTT Viewer?.

    Post
    Hi, We updated the wiki-page. The "Force go on connect" option is now explained: wiki.segger.com/J-Link_RTT_Viewer#Force_Go_on_Connect Does this answer your question? BR Fabian
  • SEGGER - Fabian -

    Replied to the thread Microchip PIC32MK Support.

    Post
    Hi tsche, Unfortunately, we had to postpone the implementation of PIC32MK support.It is still on our list of feature requests, but without definitive timeline. MIPS is not our core business, so we cannot prioritize this, unfortunately. Best…
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] Segger RTT via Telnet.

    Post
    Hi Peter, No worries! :) Best regards Fabian
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] Segger RTT via Telnet.

    Post
    Hi Peter, Quote from hotbrix: “As far I understand you, there is no way around this. I need the perma connection to stay open in order to be able to connect to the server. ” This is correct. As long as you want to use RTT, you will have to have an…
  • SEGGER - Fabian -

    Replied to the thread Microchip PIC32MK Support.

    Post
    Hi tsche, Could you please send us a picture of the front and the back of you J-Link for support purposes? BR Fabian
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] How to skip flash erase.

    Post
    Hi Peter, it seems like you misinterpreted what "SetCompareMode=0" does. This is not really a surprise as it was not properly documented. We will revisit the documentation an adjust this. In short: When SetCompareMode=0 is selected, the J-Link will skip…
  • SEGGER - Fabian -

    Replied to the thread J-Link Not connecting to Target Board.

    Post
    Hi, A good way to approach such an issue is usually the following troubleshooting guide: wiki.segger.com/J-Link_cannot_…the_CPU#Target_connection Additional hints: 1) The STM32F4 devices allow to set permanent protection (RDP level 2), which will…
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] Segger RTT via Telnet.

    Post
    Hi Peter, First of all: As Alex pointed out, an active debug connection is mandatory for RTT to work. If you are wondering why, please refer to the following article: wiki.segger.com/RTT This does not change regardless of how you retrieve the data (via…
  • SEGGER - Fabian -

    Replied to the thread JLinkExe update software popup.

    Post
    Hi Pierre, sorry for the delay in response. The issue you described was already fixed with V7.92l: While the update notification pop-up was visible, other dialogs (e.g. flash programming dialog) would not be shown until the pop-up was closed. Fixed. I…
  • SEGGER - Fabian -

    Replied to the thread JLinkExe update software popup.

    Post
    Hi Pierre, The update notification dialog should be non-blocking, so it should not interrupt your script execution. Could you please tell us a little bit more about your setup, so we can investigate this? 1) Which J-Link Software version are you…
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] RTT binary stream.

    Post
    Hi, You are welcome! :) It is good to hear that this is no longer blocking for you. We will close this thread now. Best regards, Fabian
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] RTT binary stream.

    Post
    Hi, The RTT TELNET channel is technically a RAW socket. See: wiki.segger.com/J-Link_RTT_TELNET_Channel Except: Quote from https://wiki.segger.com/J-Link_RTT_TELNET_Channel: “Note: The channel is "TELNET-like", which means: - The TELNET protocol is not…
  • SEGGER - Fabian -

    Replied to the thread [ RTT ] Sending data to Target using RTT.

    Post
    Hi AbhiAsh, Quote from AbhiAsh: “My requirement is to open a text file and send the data line by line to the target in handshake. ” We do not have a tool or example with such a feature directly. However, you could do one of the following: 1) Acquire…