SEGGER - Fabian Administrator

Hi, Thank you for your inquiry. This is a duplicate of: RP2040 Support Please refer to the information provided in this thread. We will close this thread now. Best regards, Fabian

Hi Steve, Thank you for your inquiry. To activate the "NoGUI"-mode you would have to pass -NoGUI 1 as command line parameters. Please note that there is no other value specified. This is also documented here: wiki.segger.com/J-Link_Commander#-NoGui…

Hi, We can confirm that QSPI support is not yet working on the PICO board. We are currently working on adding support for the QSPI flash. Until then you could make use of the workaround suggested by vorosj. We will keep you posted. Best regards, Fabian

Hi, Update: We found the source of the issue and fixed it. The fix is part of the latest release (V6.96) of the J-Link Software Pack: segger.com/downloads/jlink#J-L…twareAndDocumentationPack Thank you for making this known to us. We are sorry for any…

Update: We found the root cause of the issue and fixed it. The DLL was actually updated correctly, but the error message would still be triggered. The fix will be part of the next patched release, planned for Friday this week. Thank you for making this…

Hi, Thank you for your inquiry. Yes we are able to reproduce this issue. We will look into this as soon as possible. I will keep you postes. Best regards, Fabian

Hi, Thank you for your inquiry. There is no issue known to us with TLE9879 and J-Flash Lite. Could you please 1) try the latest J-link Software Pack: segger.com/downloads/jlink#J-L…twareAndDocumentationPack 2) follow the troubleshooting article on the…

Hi, Thank you for your inquiry. There is no such issue known to us. Could you please give the latest J-Link Software Pack a try? segger.com/downloads/jlink#J-L…twareAndDocumentationPack After installing the deb package, could you please try to connect…

Hi, Good to hear that you are up and running again. I will close this thread as you requested. Best regards, Fabian

Hi, Thank you for your inquiry. Currently, there is no such command line or other way to achieve what you want. I will discuss this internally and see if we can find a way to achieve what you want. I will keep you posted. Best regards, Fabian

Hi, You can find Info in the UM08001 PDF under Chapter 19 (Background information) -> 19.5 J-Link / J-Trace firmware -> 19.5.2 Invalidating the firmware. or in the wiki version here: wiki.segger.com/UM08001_J-Link…_/_Replacing_the_firmware We will close…

Hi, Thank you for your inquiry. It seems like the generic SWO initialization is not sufficient to enable SWO on this device. We put implementation of the special handling on our feature request list but cannot provide a fixed timeline yet. But I would…

Hi, I took at the CP15 handling: J-Link does this to disable the DCache for debugging purposes. Other wise J-Link might read cached data on read, and not the "real" data. Does this answer your questions? Best regards, Fabian

Hi, Thank you for your inquiry. 64 Bytes should not be a problem. Please note that support for on board J-Link (OBs) is provided by the evaluation board manufacturer and not by SEGGER. In case of the Devkit this would be Nordic. Best regards, Fabian

Hi, Thank you for your inquiry. We are not aware of such issues with ARM920T. Support has not been changed for a long period and there is no other single inquiry regarding this. Therefore, we assume that the issue is somehow related to your setup /…

Hi, I uploaded a small SEGGER Embedded Studio project (including a .hex-file) that works flawlessly on our side here: download.segger.com/Fabian/ST_STM32G484_Sample_App.zip Could you give this a quick try? The screenshots show that the device is indeed…

Hi Robert, It might. NXP implemented the i.MX8 devices via J-Link Script file. The script files are shipped together with the J-Link Software Pack under "%JLinkInstDir%\Devices\NXP\". For further support you would have to contact NXP. Hope that…

Hi, As no feedback came from you, we assume everything is working as expected now. We will close this thread. Best regards, Fabian

Hi Alex, I will close this thread for now. If the provided solution does not work for you, please contact me via direct message and I will reopen this thread. Best regards Fabian

Hi, Thank you for your inquiry. I just gave it a a quick try on our end and everything works fine here. Setup: - Windows 10 - J-Link EDU + EDU Mini - J-Link Software Pack V6.94c Questions: Is the J-Link connected via a USB hub? If so, could you please…