SEGGER - Fabian Administrator

  • Member since Aug 30th 2019
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Fabian -

    Replied to the thread Segger RTT via Telnet.

    Post
    Hi Peter, Quote from hotbrix: “As far I understand you, there is no way around this. I need the perma connection to stay open in order to be able to connect to the server. ” This is correct. As long as you want to use RTT, you will have to have an…
  • SEGGER - Fabian -

    Replied to the thread Microchip PIC32MK Support.

    Post
    Hi tsche, Could you please send us a picture of the front and the back of you J-Link for support purposes? BR Fabian
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] How to skip flash erase.

    Post
    Hi Peter, it seems like you misinterpreted what "SetCompareMode=0" does. This is not really a surprise as it was not properly documented. We will revisit the documentation an adjust this. In short: When SetCompareMode=0 is selected, the J-Link will skip…
  • SEGGER - Fabian -

    Replied to the thread J-Link Not connecting to Target Board.

    Post
    Hi, A good way to approach such an issue is usually the following troubleshooting guide: wiki.segger.com/J-Link_cannot_…the_CPU#Target_connection Additional hints: 1) The STM32F4 devices allow to set permanent protection (RDP level 2), which will…
  • SEGGER - Fabian -

    Replied to the thread Segger RTT via Telnet.

    Post
    Hi Peter, First of all: As Alex pointed out, an active debug connection is mandatory for RTT to work. If you are wondering why, please refer to the following article: wiki.segger.com/RTT This does not change regardless of how you retrieve the data (via…
  • SEGGER - Fabian -

    Replied to the thread JLinkExe update software popup.

    Post
    Hi Pierre, sorry for the delay in response. The issue you described was already fixed with V7.92l: While the update notification pop-up was visible, other dialogs (e.g. flash programming dialog) would not be shown until the pop-up was closed. Fixed. I…
  • SEGGER - Fabian -

    Replied to the thread JLinkExe update software popup.

    Post
    Hi Pierre, The update notification dialog should be non-blocking, so it should not interrupt your script execution. Could you please tell us a little bit more about your setup, so we can investigate this? 1) Which J-Link Software version are you…
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] RTT binary stream.

    Post
    Hi, You are welcome! :) It is good to hear that this is no longer blocking for you. We will close this thread now. Best regards, Fabian
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] RTT binary stream.

    Post
    Hi, The RTT TELNET channel is technically a RAW socket. See: wiki.segger.com/J-Link_RTT_TELNET_Channel Except: Quote from https://wiki.segger.com/J-Link_RTT_TELNET_Channel: “Note: The channel is "TELNET-like", which means: - The TELNET protocol is not…
  • SEGGER - Fabian -

    Replied to the thread [ RTT ] Sending data to Target using RTT.

    Post
    Hi AbhiAsh, Quote from AbhiAsh: “My requirement is to open a text file and send the data line by line to the target in handshake. ” We do not have a tool or example with such a feature directly. However, you could do one of the following: 1) Acquire…