SEGGER - Fabian Administrator

Hi Tibor, Glad I could help. Thank you for the praise. We will consider this thread as closed now. Best regards, Fabian

Hi, Thank you for your inquiry. As always, voltage is referenced from VTref. Please find the VCOM Pinout here: segger.com/products/debug-probes/j-link/ Please note, that VCOM does not work while using JTAG. We are not aware of any issues with…

Hi Tibor, I sent the JLinkScript file for EFR32MG12PXXXF1024 to you via e-mail. Do you have any further questions? Best regards, Fabian

Hi Steve, as already mentioned: 1) NXP added all the the support for the i.MX8. They did not include the Cortex-A35 core. 2) We do not yet support i.MX8. We will add support sometime later this year. Stay up-to-date regarding J-Link: …

Hi Tibro, The "InitTarget()" function initializes and sets up the connection between the J-Link and the target. You will have to set up the ARM specific debug registers, init the AHBAP accesses and all the target specifics, that are needed to connect to…

Hi Francis, Good to hear that you are up and running again. We will consider this thread as closed now. Best regards, Fabian

Hi Steve, What ever NXP told you does not change the following facts: NXP created some J-Link script files to support the Cortex-M core on the i.MX8 series devices. These scripts are currently shipped with the J-Link SW but are only maintained and…

Hi Alessio, Sorry if my explaination wasn't clear enaugh: The Config string has to be sent from the host system, not the target. So you send it via e.g. putty within 100ms after esablishing the connection between putty and the TELNET channel. Best…

Hi, Great, thank you! Best regards, Fabian

Hi Tuna, As long as this option is no problem for you. We will consider this thread as closed. Best regards, Fabian

Hi, Quote from Hardwariano: “I suggest including the explanation you gave me in the next version of the manual. ” Thank you for the feedback. We will discuss this internally. Quote from Hardwariano: “Is it possible to store the data read with…

Hi Francis, Thank you for your inquiry. Regarding "verify": A verify is part of "loadfile", so no need to do it manually. Regarding your command line: The commandline looks good to me and works when I use it. What exactly do you mean by "does not…

Hi, Good to hear, that you are up and running again. The "-save" command line option saves the current, altered state of the data file, if there already is one. Example: -You open a project and you open a file (e.g "data.hex") -You merge some content to…

Hi, We noticed that you marked this Thread as solved. Is the issue resolved? If so do you mind sharing the solution with community? Best regards, Fabian

Hi, Thank you for your inquiry. The reason why the RTT Control Block cannot be found is most likely that it is placed outside of the RAM area specified in out DLL. You can (as you already know) specify, the address to the DLL so it does not need to find…

Hi, We received your inquiry in our ticket system. And answered you via mail. We will consider this thread as closed. Best regards, Fabian

Hi Álvaro, Sorry for the delay in response. Busy times... The chip you are trying to program is a serial, cfi compliant chip. There are some extra steps needed to make this work. You can find information about how to do this here: …

Hi Raj, Sorry for the delay in response. Busy days... As already mentioned, no overshoot problem is known to us. Could you provide us with your J-Link serial number for reference? Are you using custom cables or cables provided by SEGGER? What target…

Hi James, This is how we tested CubeIDE and it worked for us: wiki.segger.com/STM32CubeIDE Did you setup the CubeIDE like this? If I understand you correctly, this issue is not occurring consistently. Correct? If so, then it is most likely a CubeIDE…

Hi Tuna, Thank you for your inquiry. Could you please tell us which device exactly you are using? How to flash and how to exactly connect to a device often highly depends on the device specifics. Does it work when you pass the correct device name to…